Navigation
HYPE Documentation
Quick links to often-used pages:
HYPE links
HYPE OSC (model code)
HYPE Open data access
SMHI Hydrology Research Dep., main developer and maintainer of the HYPE model
Sidebar
start:hype_file_reference
This is an old revision of the document!
Table of Contents
HYPE file reference
This part of the HYPE documentation is a reference guide to all mandatory and optional HYPE files. HYPE works with plain text files for model setup, data input/output, and calibration.
The tables in the following sections contain file names and short descriptions of mandatory and optional input and output files for HYPE, grouped by content type. More detailed descriptions on file content, format and requirements are found in the section of each file.
Input files marked mandatory in the tables below must exist for a basic HYPE setup. Other files are required only for optional model components, e.g. glaciers, or for specific model tasks, e.g. parameter calibration.
As a shortcut, here are three links to frequently used references when running an existing HYPE setup:
- info.txt, which is the main instruction file of HYPE where all options are specified for a model simulation
- par.txt, which holds the values of model parameters
- HYPE variables, a list of variable names used for HYPE inputs and outputs
Setup files
Setup files contain information about a HYPE model domain, model parameters, model options (model choice and simulation settings).
| File name | Requirement | Description |
|---|---|---|
| filedir.txt | optional | provides location of info.txt |
| info.txt | mandatory | model options and simulation settings |
| pmsf.txt | optional | partial model setup, defines part of model domain to simulate |
| update.txt | optional | for updating of model variables with observations |
| GeoClass.txt | mandatory | SLC class definition (HRUs) |
| GeoData.txt | mandatory | subcatchment characteristics and flow connections between them |
| BranchData.txt | optional | bifurcations in the flow network |
| LakeData.txt | optional | properties of specific lakes (including regulated dams) |
| DamData.txt | optional | properties of specific regulated lakes, extends LakeData.txt |
| CropData.txt | optional | information about crops and vegetation |
| PointSourceData.txt | optional | information about point sources and water abstraction |
| PSMonthlySeries.txt | optional | information about time-varying monthly point sources and water abstractions (in development, not released yet) |
| MgmtData.txt | optional | information about irrigation and water transfer |
| AquiferData.txt | optional | information about regional aquifers |
| FloodData.txt | optional | information about floodplain |
| GlacierData.txt | optional | information about glaciers |
| par.txt | mandatory | model parameters, some is calibrated |
| state_save | optional | files containing saved model states for model initialisation |
| reg_par.txt | optional | file containing regional regression coefficients, for parameter regionalization method |
| CatchDes.txt | optional | list of catchment descriptors, for parameter regionalization method |
| CatchGroup.txt | optional | list of catchment group membership of all subbasins, for parameter regionalization method |
| Outregions.txt | optional | information about output regions |
| ForcKey.txt | optional | link list between subcatchment IDs and forcing data IDs, as well as temperature observation elevations |
| LeakageData.txt | optional | soil leakage concentrations to replace runoff concentrations |
Observation data files
Observation data files are HYPE input files which contain time series, both forcing data and evaluation data.
All HYPE variable IDs are described in the complete HYPE variable list, while HYPE variable IDs useable in Xobs.txt are also described in the Xobs.txt section.
| File name | Requirement | Description |
|---|---|---|
| Pobs.txt | mandatory | precipitation forcing (HYPE variable ID: prec) |
| Tobs.txt | mandatory | air temperature forcing (HYPE variable ID: temp) |
| Qobs.txt | optional | discharge observations (HYPE variable ID: rout) |
| Xobs.txt | optional | observations of evaluation variables for subbasins, e.g. nutrient concentrations, lake water stage |
| Xoregobs.txt | optional | observations of evaluation variables for output regions, e.g. snow |
| RHobs.txt | optional | relative humidity forcing |
| SFobs.txt | optional | snowfall fraction of precipitation forcing |
| SWobs.txt | optional | shortwave radiation forcing |
| TMINobs.txt | optional | daily minimum air temperature forcing |
| TMAXobs.txt | optional | daily maximum air temperature forcing |
| Uobs.txt | optional | wind speed forcing |
| UWobs.txt | optional | u-component wind speed forcing |
| VWobs.txt | optional | v-component wind speed forcing |
| XobsXOMn.txt | optional | observations of evaluation variables, one per file (HYPE variable ID: xom0-xom9) |
| XobsXOSn.txt | optional | observations of evaluation variables, one per file (HYPE variable ID: xos0-xos9) |
Output files
Output files contain model results. This includes time series of simulations and observations (for each time step or averaged/summed over a longer period) as well as model performance results.
All HYPE variable IDs used in HYPE output files are described in the complete HYPE variable list.
| File name | Requirement | Description |
|---|---|---|
| hyss_seqnr_yymmdd_HHMM.log | automatic | log file, created for each model run |
| tests_seqnr_yymmdd_HHMM.log | automatic | log file, created for model tests |
| XXXXXXX.txt | optional | basin output file, several output variables for one subbasin (subid=XXXXXXX) |
| XXXXXXX.txt (regional) | optional | region output file, several output variables for one output region (outregid=XXXXXXX) |
| timeXXXX.txt | optional | time output file, output of single variable (HYPE variable ID=XXXX) for all subbasins |
| mapXXXX.txt | optional | map output file, output of single variable (HYPE variable ID=XXXX) for all subbasins, formatted for GIS |
| XXXXXXX.txt or timeXXXX.txt (class) | optional | class output files, several output variables for a single subbasin or output of single variable for all subbasins, both file variants for a single class or class group |
| subassX.txt | optional | subbasin assessment, performance criteria for subbasins |
| simass.txt | optional | simulation assessment, summarising performance criteria over model domain |
| yyyy_ss.txt | optional | result files with annual nutrient transports per subbasin and source |
| Wbf_xxx.txt | optional | water balance: flows per subbasin and day |
| Wbff_xxx.txt | optional | water balance: floodplain related flows per subbasin and day |
| Wbfs_xxx.txt | optional | water balance: irrigation flows per subbasin and day |
| Wbs_xxx.txt | optional | water balance: storage per subbasin and day |
| state_saveyyyymmdd[HHMM] | optional | files containing saved model states for model initialisation |
Calibration files
Calibration files are files related to the parameter calibration model option in HYPE, both for setup and results. Additional calibration information is given in info.txt where the objective function for the optimization (see performance criteria) is set and calibration turned on.
All HYPE variable IDs used in HYPE calibration files are described in the complete HYPE variable list.
| File name | Requirement | Description |
|---|---|---|
| optpar.txt | optional (mandatory for calibration) | calibration simulation settings including parameter ranges |
| qNstartpar.txt | optional | starting values for parameter optimization using quasiNewton methods (including Brent) |
| respar.txt | optional | optimal parameter values of calibration |
| bestsims.txt | optional | best performance criteria and parameter values of calibration |
| allsim.txt | optional | performance results (criteria and parameter values) of all runs during calibration |
| calibration.log | automatic | calibration log file |
Water balance files
A set of output files giving subbasin water balance. The water balance is calculated for each time step and subbasin, and one file holds one flow or store.
| File prefix | Type | Unit | Description |
|---|---|---|---|
| WBs | store | m3 | water volume in each store for each time step for all subbasins or for selected subbasins (irrigation, floodplains) or for aquifers |
| WBf | flow | m3 ts-1 | horizontal flows between subbasins and regional groundwater flows |
| WBf | flow | m3 ts-1 | vertical or horizontal flows within subbasin |
| WBfs/WBf | flow | m3 ts-1 | water management flows; irrigation (WBfs) for selected subbasins, water transfer flow (WBf) and point sources (WBf) for all subbasins |
| WBff | flow | m3 ts-1 | floodplain related flows |
A description of these will come (HYPE water balance).
start/hype_file_reference.1588149808.txt.gz ยท Last modified: 2023/11/16 14:28 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
