# HYPE Model Documentation

### Site Tools

start:hype_file_reference:forckey.txt

# Differences

This shows you the differences between two versions of the page.

 start:hype_file_reference:forckey.txt [2017/03/24 16:02]cpers start:hype_file_reference:forckey.txt [2017/03/24 16:03] (current)cpers Both sides previous revision Previous revision 2017/03/24 16:03 cpers 2017/03/24 16:02 cpers 2017/03/24 16:01 cpers 2017/03/24 16:01 cpers 2017/03/24 16:00 cpers 2017/03/24 15:58 cpers 2017/03/24 15:56 cpers 2017/03/24 15:54 cpers 2016/12/05 15:04 rcapell 2015/07/15 08:55 cpers 2015/05/05 17:23 cpers 2015/05/05 17:21 cpers 2015/05/05 17:20 cpers 2015/05/05 17:13 cpers 2015/05/05 17:12 cpers 2015/05/05 17:10 cpers created 2017/03/24 16:03 cpers 2017/03/24 16:02 cpers 2017/03/24 16:01 cpers 2017/03/24 16:01 cpers 2017/03/24 16:00 cpers 2017/03/24 15:58 cpers 2017/03/24 15:56 cpers 2017/03/24 15:54 cpers 2016/12/05 15:04 rcapell 2015/07/15 08:55 cpers 2015/05/05 17:23 cpers 2015/05/05 17:21 cpers 2015/05/05 17:20 cpers 2015/05/05 17:13 cpers 2015/05/05 17:12 cpers 2015/05/05 17:10 cpers created Line 1: Line 1: ====== ForcKey.txt/​ForcKey_nnn.txt ====== ====== ForcKey.txt/​ForcKey_nnn.txt ====== - In the basic case, forcing data time series are given for each subbasin. It is possible to use one time series of forcing to represent the conditions for several subbasins. In this case the forcing data time series are given an identification (obsid) separate from the subid. The ForcKey-file gives the coupling between subbasins and forcing data. It can also hold information about elevation for temperature observations ([[start:​hype_file_reference:​tobs.txt|Tobs.txt]]) that may be used for temperature corrections with parameter ''​tcobselev''​. ​ + In the basic case, forcing data time series are given for each subbasin. It is possible to use one time series of forcing to represent the conditions for several subbasins. In this case the forcing data time series are given an identification (obsid) separate from the subid. The ForcKey-file gives the coupling between subbasins and forcing data. It can also hold information about elevation for temperature observations ([[start:​hype_file_reference:​tobs.txt|Tobs.txt]]) that will be used for temperature corrections with parameter ''​tcobselev''​. ​ The file is optional and located in the [[start:​hype_file_reference:​info.txt&#​model_options|modeldir]] folder given in  [[start:​hype_file_reference:​info.txt|info.txt]]. You can use code ''​readobsid''​ in info.txt to use this file, but default is to use the file so it is not necessary. If the file is found its information is used and have priority over the same information found in [[start:​hype_file_reference:​geodata.txt|GeoData.txt]]. ​ The file is optional and located in the [[start:​hype_file_reference:​info.txt&#​model_options|modeldir]] folder given in  [[start:​hype_file_reference:​info.txt|info.txt]]. You can use code ''​readobsid''​ in info.txt to use this file, but default is to use the file so it is not necessary. If the file is found its information is used and have priority over the same information found in [[start:​hype_file_reference:​geodata.txt|GeoData.txt]]. ​