start:hype_file_reference:par.txt
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
start:hype_file_reference:par.txt [2018/06/05 15:36] cpers |
start:hype_file_reference:par.txt [2018/11/16 09:31] cpers [Table] |
||
|---|---|---|---|
| Line 47: | Line 47: | ||
| <sortable> | <sortable> | ||
| - | ^ Name ^ Unit ^ Dependency ^ Description ^ Link ^ | + | ^ Name ^ Unit ^ Dependency ^ Description ^ Link ^ |
| - | |''wcfc''|//-//|soil type|fraction of soil available for evapotranspiration but not for runoff, same for all soil layers (used if ''wcfc1'' not given)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcfc'' | //-// | soil type | fraction of soil available for evapotranspiration but not for runoff, same for all soil layers (used if ''wcfc1'' not given) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcwp''|//-//|soil type|wilting point as a fraction, same for all soil layers (used if ''wcwp1'' not given)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcwp'' | //-// | soil type | wilting point as a fraction, same for all soil layers (used if ''wcwp1'' not given) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcep''|//-//|soil type|effective porosity as a fraction, same for all soil layers (used if ''wcep1'' not given)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcep'' | //-// | soil type | effective porosity as a fraction, same for all soil layers (used if ''wcep1'' not given) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcfc1''|//-//|soil type|fraction of soil available for evapotranspiration but not for runoff, for uppermost soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcfc1'' | //-// | soil type | fraction of soil available for evapotranspiration but not for runoff, for uppermost soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcwp1''|//-//|soil type|wilting point as a fraction, for uppermost soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcwp1'' | //-// | soil type | wilting point as a fraction, for uppermost soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcep1''|//-//|soil type|effective porosity as a fraction, for uppermost soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcep1'' | //-// | soil type | effective porosity as a fraction, for uppermost soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcfc2''|//-//|soil type|fraction of soil available for evapotranspiration but not for runoff, for second soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcfc2'' | //-// | soil type | fraction of soil available for evapotranspiration but not for runoff, for second soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcwp2''|//-//|soil type|wilting point as a fraction, for second soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcwp2'' | //-// | soil type | wilting point as a fraction, for second soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcep2''|//-//|soil type|effective porosity as a fraction, for second soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcep2'' | //-// | soil type | effective porosity as a fraction, for second soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcfc3''|//-//|soil type|fraction of soil available for evapotranspiration but not for runoff, for lowest soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcfc3'' | //-// | soil type | fraction of soil available for evapotranspiration but not for runoff, for lowest soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcwp3''|//-//|soil type|wilting point as a fraction, for lowest soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcwp3'' | //-// | soil type | wilting point as a fraction, for lowest soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''wcep3''|//-//|soil type|effective porosity as a fraction, for lowest soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]]| | + | | ''wcep3'' | //-// | soil type | effective porosity as a fraction, for lowest soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#basic_assumptions|water content]] | |
| - | |''mperc1''|//mm ts<sup>-1</sup>//|soil type|maximum percolation capacity from soil layer 1 to soil layer 2|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#percolation|perc]]| | + | | ''mperc1'' | //mm ts<sup>-1</sup>// | soil type | maximum percolation capacity from soil layer 1 to soil layer 2 | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#percolation|perc]] | |
| - | |''mperc2''|//mm ts<sup>-1</sup>//|soil type|maximum percolation capacity from soil layer 2 to soil layer 3|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#percolation|perc]]| | + | | ''mperc2'' | //mm ts<sup>-1</sup>// | soil type | maximum percolation capacity from soil layer 2 to soil layer 3 | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#percolation|perc]] | |
| - | |''cmlt''|//mm °C<sup>-1</sup> ts<sup>-1</sup>//|land use|melting parameter for snow|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_melt|snow melt]]| | + | | ''cmlt'' | //mm °C<sup>-1</sup> ts<sup>-1</sup>// | land use | melting parameter for snow | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_melt|snow melt]] | |
| - | |''ttmp''|//°C//|land use|threshold temperature for snow melt, snow density and evapotranspiration|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_melt|snow melt]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#rainfall_and_snowfall_calculation|snow or rain]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]]| | + | | ''ttmp'' | //°C// | land use | threshold temperature for snow melt, snow density and evapotranspiration | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_melt|snow melt]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#rainfall_and_snowfall_calculation|snow or rain]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]] | |
| - | |''ttpd''|//°C//|general|deviation from ttmp for threshold temperature for snow-/rainfall|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#rainfall_and_snowfall_calculation|snow or rain]]| | + | | ''ttpd'' | //°C// | general | deviation from ttmp for threshold temperature for snow-/rainfall | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#rainfall_and_snowfall_calculation|snow or rain]] | |
| - | |''ttpi''|//°C//|general|half of temperature interval with mixed snow- and rainfall. Interval is (ttmp+ttpd) +/- ttpi.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_melt|snow melt]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#rainfall_and_snowfall_calculation|snow or rain]]| | + | | ''ttpi'' | //°C// | general | half of temperature interval with mixed snow- and rainfall. Interval is (ttmp+ttpd) +/- ttpi. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_melt|snow melt]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#rainfall_and_snowfall_calculation|snow or rain]] | |
| - | |''cevp''|//mm °C<sup>-1</sup> ts<sup>-1</sup>//|land use|evapotranspiration parameter|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]]| | + | | ''cevp'' | //mm °C<sup>-1</sup> ts<sup>-1</sup>// | land use | evapotranspiration parameter | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]] | |
| - | |''t1evap''|//-//|general|evaporation factor for substance T1 (0-1), default is 0, if 1 the substance evaporates with the water|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''t1evap'' | //-// | general | evaporation factor for substance T1 (0-1), default is 0, if 1 the substance evaporates with the water | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''frost''|//cm °C<sup>-1</sup> or -//|land use|frost depth parameter (both frost and sfrost must be >0 for simulation to occur)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diagnostic_variables|frost]]| | + | | ''frost'' | //cm °C<sup>-1</sup> or -// | land use | frost depth parameter (both frost and sfrost must be >0 for simulation to occur) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diagnostic_variables|frost]] | |
| - | |''sfrost''|//- or cm °C<sup>-1</sup>//|soil type|frost depth parameter (both frost and sfrost must be >0 for simulation to occur)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diagnostic_variables|frost]]| | + | | ''sfrost'' | //- or cm °C<sup>-1</sup>// | soil type | frost depth parameter (both frost and sfrost must be >0 for simulation to occur) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diagnostic_variables|frost]] | |
| - | |''deepmem''|//d//|general|deep soil temperature memory|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|soil temp]]| | + | | ''deepmem'' | //d// | general | deep soil temperature memory | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|soil temp]] | |
| - | |''surfmem''|//d//|land use|upper soil layer soil temperature memory|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|soil temp]]| | + | | ''surfmem'' | //d// | land use | upper soil layer soil temperature memory | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|soil temp]] | |
| - | |''depthrel''|//m<sup>-1</sup>//|land use|depth relation for soil temperature memory|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|soil temp]]| | + | | ''depthrel'' | //m<sup>-1</sup>// | land use | depth relation for soil temperature memory | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|soil temp]] | |
| - | |''rrcs1''|//ts<sup>-1</sup>//|soil type|recession coefficient for uppermost soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#groundwater_runoff|runoff]]| | + | | ''rrcs1'' | //ts<sup>-1</sup>// | soil type | recession coefficient for uppermost soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#groundwater_runoff|runoff]] | |
| - | |''rrcs2''|//ts<sup>-1</sup>//|soil type|recession coefficient for lowest soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#groundwater_runoff|runoff]]| | + | | ''rrcs2'' | //ts<sup>-1</sup>// | soil type | recession coefficient for lowest soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#groundwater_runoff|runoff]] | |
| - | |''rrcs3''|//ts<sup>-1</sup> %<sup>-1</sup>//|general|recession coefficient for slope dependence (upper layer)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#groundwater_runoff|runoff]]| | + | | ''rrcs3'' | //ts<sup>-1</sup> %<sup>-1</sup>// | general | recession coefficient for slope dependence (upper layer) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#groundwater_runoff|runoff]] | |
| - | |''srrcs''|//ts<sup>-1</sup>//|land use|recession coefficient for surface runoff (fraction), should be set to 1 for lake and riverclasses with floodplains|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#saturated_surface_runoff|surface runoff]]| | + | | ''srrcs'' | //ts<sup>-1</sup>// | land use | recession coefficient for surface runoff (fraction), should be set to 1 for lake and riverclasses with floodplains | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#saturated_surface_runoff|surface runoff]] | |
| - | |''trrcs''|//ts<sup>-1</sup>//|soil type|recession coefficient for tile drains|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#runoff_through_drainage_pipes|tile runoff]]| | + | | ''trrcs'' | //ts<sup>-1</sup>// | soil type | recession coefficient for tile drains | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#runoff_through_drainage_pipes|tile runoff]] | |
| - | |''rrcscorr''|//-//|parreg|correction factor for recession rrcs=rrcs(1+rrcscorr) for rrcs1,rrcs2,trrcs and srrcs|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#groundwater_runoff|runoff]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#runoff_through_drainage_pipes|tile runoff]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#saturated_surface_runoff|surface runoff]]| | + | | ''rrcscorr'' | //-// | parreg | correction factor for recession rrcs=rrcs(1+rrcscorr) for rrcs1,rrcs2,trrcs and srrcs | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#groundwater_runoff|runoff]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#runoff_through_drainage_pipes|tile runoff]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#saturated_surface_runoff|surface runoff]] | |
| - | |''cevpam''|//-//|general|amplitude of sinus function (about 1) that corrects potential evapotranspiration.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]]| | + | | ''cevpam'' | //-// | general | amplitude of sinus function (about 1) that corrects potential evapotranspiration. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]] | |
| - | |''cevpph''|//d//|general|phase of sinus function that corrects potential evapotranspiration|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]]| | + | | ''cevpph'' | //d// | general | phase of sinus function that corrects potential evapotranspiration | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]] | |
| - | |''cevpcorr''|//-//|parreg|correction factor for evapotranspiration cevap=evap(1+cevpcorr)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]]| | + | | ''cevpcorr'' | //-// | parreg | correction factor for evapotranspiration cevap=evap(1+cevpcorr) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]] | |
| - | |''lp''|//-//|general|factor for calculating the soil water limit for potential evapotranspiration|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|evap]]| | + | | ''lp'' | //-// | general | factor for calculating the soil water limit for potential evapotranspiration | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|evap]] | |
| - | |''gratk''|//-//|general|parameter of rating curve for lake outflow <m> Q=gratk*(w-w0)^gratp </m>|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#simple_outlet_lake_or_dam_olake|rating curve]]| | + | | ''gratk'' | //-// | general | parameter of rating curve for lake outflow <m> Q=gratk*(w-w0)^gratp </m> | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#simple_outlet_lake_or_dam_olake|rating curve]] | |
| - | |''gratp''|//-//|general|parameter of rating curve for lake outflow <m> Q=gratk*(w-w0)^gratp </m>|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#simple_outlet_lake_or_dam_olake|rating curve]]| | + | | ''gratp'' | //-// | general | parameter of rating curve for lake outflow <m> Q=gratk*(w-w0)^gratp </m> | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#simple_outlet_lake_or_dam_olake|rating curve]] | |
| - | |''grata''|//-//|general|upstream area dependence of discharge curve for lake, if grata>0 and uparea>0 <m> Q=(gratk*(uparea)^grata)*(w-w0)^gratp </m>|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#simple_outlet_lake_or_dam_olake|rating curve]]| | + | | ''grata'' | //-// | general | upstream area dependence of discharge curve for lake, if grata>0 and uparea>0 <m> Q=(gratk*(uparea)^grata)*(w-w0)^gratp </m> | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#simple_outlet_lake_or_dam_olake|rating curve]] | |
| - | |''limqprod''|//-//|general|limit for water stage with reduced production flow from dam (fraction of regulating volume) (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|| | + | | ''limqprod'' | //-// | general | limit for water stage with reduced production flow from dam (fraction of regulating volume) (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) || |
| - | |''krelflood''|//-//|general|factor for increased production flow from flood control dam|| | + | | ''krelflood'' | //-// | general | factor for increased production flow from flood control dam || |
| - | |''kthrflood''|//-//|general|factor for flow threshold for increased production flow from flood control dam|| | + | | ''kthrflood'' | //-// | general | factor for flow threshold for increased production flow from flood control dam || |
| - | |''klowflood''|//-//|general|factor for water level threshold with production flow from flood control dam equal to inflow|| | + | | ''klowflood'' | //-// | general | factor for water level threshold with production flow from flood control dam equal to inflow || |
| - | |''rivvel''|//m s<sup>-1</sup>//|general|celerity of flood in watercourse (rivvel>0)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_rivers_processes|river]]| | + | | ''rivvel'' | //m s<sup>-1</sup>// | general | celerity of flood in watercourse (rivvel>0) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_rivers_processes|river]] | |
| - | |''damp''|//-//|general|fraction of delay in the watercourse which also causes damping|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_rivers_processes|river]]| | + | | ''damp'' | //-// | general | fraction of delay in the watercourse which also causes damping | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_rivers_processes|river]] | |
| - | |''deadl''|//m<sup>2</sup> km<sup>-2</sup>//|general|parameter to calculate the dead volume in the local watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_rivers_processes|river]]| | + | | ''deadl'' | //m<sup>2</sup> km<sup>-2</sup>// | general | parameter to calculate the dead volume in the local watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_rivers_processes|river]] | |
| - | |''deadm''|//m<sup>2</sup> km<sup>-2</sup>//|general|parameter to calculate the dead volume in the main watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_rivers_processes|river]]| | + | | ''deadm'' | //m<sup>2</sup> km<sup>-2</sup>// | general | parameter to calculate the dead volume in the main watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_rivers_processes|river]] | |
| - | |''tcalt''|//°C (100m)<sup>-1</sup>//|general|parameter for temperature’s elevation dependence, uses SLC’s deviation from subbasin mean height (=0.6°C/100m)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]]| | + | | ''tcalt'' | //°C (100m)<sup>-1</sup>// | general | parameter for temperature’s elevation dependence, uses SLC’s deviation from subbasin mean height (=0.6°C/100m) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]] | |
| - | |''tempcorr''|//°C//|parreg|correction parameter for temperature|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]]| | + | | ''tempcorr'' | //°C// | parreg | correction parameter for temperature | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]] | |
| - | |''tcelevadd''|//°C (100m)<sup>-1</sup>//|general|parameter for temperature’s elevation dependence, uses subbasin mean height|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]]| | + | | ''tcelevadd'' | //°C (100m)<sup>-1</sup>// | general | parameter for temperature’s elevation dependence, uses subbasin mean height | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]] | |
| - | |''tcobselev''|//°C (100m)<sup>-1</sup>//|general|parameter for temperature correction due to observation elevation deviation from subbasin elevation|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]]| | + | | ''tcobselev'' | //°C (100m)<sup>-1</sup>// | general | parameter for temperature correction due to observation elevation deviation from subbasin elevation | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]] | |
| - | |''monthlapse''|//°C (100m)<sup>-1</sup>//|month|alternative parameter for temperature correction with elevation, monthly temperature lapse rate (positive when decresasing with elevation, same as ''tcalt'' and ''tcelevadd'')|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]]| | + | | ''monthlapse'' | //°C (100m)<sup>-1</sup>// | month | alternative parameter for temperature correction with elevation, monthly temperature lapse rate (positive when decresasing with elevation, same as ''tcalt'' and ''tcelevadd'') | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#temperature_adjustments|temp]] | |
| - | |''pcaddg''|//-//|general|correction parameter for precipitation|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]]| | + | | ''pcaddg'' | //-// | general | correction parameter for precipitation | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]] | |
| - | |''pcurain''|//-//|general|undercatch correction for rainfall, rainfall = rainfall * (1+pcurain). The correction is applied at the observation level, before using any elevation corrections to basin mean elevation or class specific elevations. Since the snowfall threshold temperature is landuse specific, the correction is weighted depending on the areal fractions of the landuse classes. The same applies to the ''pcusnow'' parameter|| | + | | ''pcurain'' | //-// | general | undercatch correction for rainfall, rainfall = rainfall * (1+pcurain). The correction is applied at the observation level, before using any elevation corrections to basin mean elevation or class specific elevations. Since the snowfall threshold temperature is landuse specific, the correction is weighted depending on the areal fractions of the landuse classes. The same applies to the ''pcusnow'' parameter || |
| - | |''pcusnow''|//-//|general|undercatch correction for snowfall, snowfall = snowfall*(1+pcusnow). See notes for ''pcurain''.|| | + | | ''pcusnow'' | //-// | general | undercatch correction for snowfall, snowfall = snowfall*(1+pcusnow). See notes for ''pcurain''. || |
| - | |''pcluse''|//-//|land use|correction factor for precipitation prec=prec(1-pcluse)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]]| | + | | ''pcluse'' | //-// | land use | correction factor for precipitation prec=prec(1-pcluse) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]] | |
| - | |''pcelevadd''|//(100m)<sup>-1</sup>//|general|correction parameter for precipitation (per 100 m elevation > pcelevth)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]]| | + | | ''pcelevadd'' | //(100m)<sup>-1</sup>// | general | correction parameter for precipitation (per 100 m elevation > pcelevth) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]] | |
| - | |''pcelevth''|//m//|general|elevation above which the precipitation correction pcelevadd is used|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]]| | + | | ''pcelevth'' | //m// | general | elevation above which the precipitation correction pcelevadd is used | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]] | |
| - | |''pcelevmax''|//-//|general|maximum for height dependent precipitation correction|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]]| | + | | ''pcelevmax'' | //-// | general | maximum for height dependent precipitation correction | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]] | |
| - | |''pcelevstd''|//(100m)<sup>-1</sup>//|general|correction parameter for precipitation (per 100 m of elevation standard deviation)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]]| | + | | ''pcelevstd'' | //(100m)<sup>-1</sup>// | general | correction parameter for precipitation (per 100 m of elevation standard deviation) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]] | |
| - | |''preccorr''|//-//|parreg|correction factor for precipitation <m>prec=prec(1+preccorr)</m>|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]]| | + | | ''preccorr'' | //-// | parreg | correction factor for precipitation <m>prec=prec(1+preccorr)</m> | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#precipitation_adjustments|prec]] | |
| - | |''gldepi''|//m//|general|depth for all ilakes|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#basic_assumptions|lake]]| | + | | ''gldepi'' | //m// | general | depth for all ilakes | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#basic_assumptions|lake]] | |
| - | |''denitrlu''|//d<sup>-1</sup>//|land use|parameter for denitrification rate in soil|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#denitrification|denitrif]]| | + | | ''denitrlu'' | //d<sup>-1</sup>// | land use | parameter for denitrification rate in soil | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#denitrification|denitrif]] | |
| - | |''denitrlu3''|//d<sup>-1</sup>//|land use|denitrification rate in third soil layer, replaces ''denitrlu'' if set to //>= 0//. If only used for some land use classes, set to //-1// for all other.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#denitrification|denitrif]]| | + | | ''denitrlu3'' | //d<sup>-1</sup>// | land use | denitrification rate in third soil layer, replaces ''denitrlu'' if set to //>= 0//. If only used for some land use classes, set to //-1// for all other. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#denitrification|denitrif]] | |
| - | |''degradhp''|//d<sup>-1</sup>//|land use|decay of humus to fastP|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#immobile_soil_nutrient_pool_transformations|NP soil]]| | + | | ''degradhp'' | //d<sup>-1</sup>// | land use | decay of humus to fastP | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#immobile_soil_nutrient_pool_transformations|NP soil]] | |
| - | |''degradhn''|//d<sup>-1</sup>//|land use|decay of humus to fastN|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#immobile_soil_nutrient_pool_transformations|NP soil]]| | + | | ''degradhn'' | //d<sup>-1</sup>// | land use | decay of humus to fastN | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#immobile_soil_nutrient_pool_transformations|NP soil]] | |
| - | |''minerfn''|//d<sup>-1</sup>//|land use|mineralisation of fastN to inorganic N|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#immobile_soil_nutrient_pool_transformations|NP soil]]| | + | | ''minerfn'' | //d<sup>-1</sup>// | land use | mineralisation of fastN to inorganic N | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#immobile_soil_nutrient_pool_transformations|NP soil]] | |
| - | |''minerfp''|//d<sup>-1</sup>//|land use|mineralisation of fastP to SRP|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#immobile_soil_nutrient_pool_transformations|NP soil]]| | + | | ''minerfp'' | //d<sup>-1</sup>// | land use | mineralisation of fastP to SRP | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#immobile_soil_nutrient_pool_transformations|NP soil]] | |
| - | |''dissolfp''|//d<sup>-1</sup>//|land use|decay of fastP to dissolved PP|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#dissolution_of_soil_organic_pools|NP soil]]| | + | | ''dissolfp'' | //d<sup>-1</sup>// | land use | decay of fastP to dissolved PP | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#dissolution_of_soil_organic_pools|NP soil]] | |
| - | |''dissolfn''|//d<sup>-1</sup>//|land use|decay of fastN to dissolved organic N|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#dissolution_of_soil_organic_pools|NP soil]]| | + | | ''dissolfn'' | //d<sup>-1</sup>// | land use | decay of fastN to dissolved organic N | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#dissolution_of_soil_organic_pools|NP soil]] | |
| - | |''dissolhp''|//d<sup>-1</sup>//|land use|decay of humusP to dissolved PP|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#dissolution_of_soil_organic_pools|NP soil]]| | + | | ''dissolhp'' | //d<sup>-1</sup>// | land use | decay of humusP to dissolved PP | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#dissolution_of_soil_organic_pools|NP soil]] | |
| - | |''dissolhn''|//d<sup>-1</sup>//|land use|decay of humusN to dissolved organic N|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#dissolution_of_soil_organic_pools|NP soil]]| | + | | ''dissolhn'' | //d<sup>-1</sup>// | land use | decay of humusN to dissolved organic N | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#dissolution_of_soil_organic_pools|NP soil]] | |
| - | |''wprodn''|//kg m<sup>-3</sup> d<sup>-1</sup>//|general|production/decay of N in water (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP river lake]]| | + | | ''wprodn'' | //kg m<sup>-3</sup> d<sup>-1</sup>// | general | production/decay of N in water (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP river lake]] | |
| - | |''wprodp''|//kg m<sup>-3</sup> d<sup>-1</sup>//|general|production/decay of P in water (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP river lake]]| | + | | ''wprodp'' | //kg m<sup>-3</sup> d<sup>-1</sup>// | general | production/decay of P in water (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP river lake]] | |
| - | |''wprodc''|//kg m<sup>-3</sup> d<sup>-1</sup>//|general|production/decay of OC in water (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#primary_production_and_mineralization|C river lake]]| | + | | ''wprodc'' | //kg m<sup>-3</sup> d<sup>-1</sup>// | general | production/decay of OC in water (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#primary_production_and_mineralization|C river lake]] | |
| - | |''hsatTP''|//mg L<sup>-1</sup>//|general|half saturation concentration of TP for production and mineralisation in surface water|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP river lake]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#primary_production_and_mineralization|C river lake]]| | + | | ''hsatTP'' | //mg L<sup>-1</sup>// | general | half saturation concentration of TP for production and mineralisation in surface water | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP river lake]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#primary_production_and_mineralization|C river lake]] | |
| - | |''hsatINs''|//mg L<sup>-1</sup>//|general|half saturation concentration of IN for denitrification in soil|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#denitrification|denitrif]]| | + | | ''hsatINs'' | //mg L<sup>-1</sup>// | general | half saturation concentration of IN for denitrification in soil | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#denitrification|denitrif]] | |
| - | |''hsatINw''|//mg L<sup>-1</sup>//|general|half saturation concentration of IN for denitrification in surface water|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#denitrification|denitrif]]| | + | | ''hsatINw'' | //mg L<sup>-1</sup>// | general | half saturation concentration of IN for denitrification in surface water | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#denitrification|denitrif]] | |
| - | |''denitwrl''|//kg m<sup>-2</sup> d<sup>-1</sup>//|general|parameter for denitrification in local watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#denitrification|denitrif]]| | + | | ''denitwrl'' | //kg m<sup>-2</sup> d<sup>-1</sup>// | general | parameter for denitrification in local watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#denitrification|denitrif]] | |
| - | |''denitwrm''|//kg m<sup>-2</sup> d<sup>-1</sup>//|general|parameter for denitrification in main watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#denitrification|denitrif]]| | + | | ''denitwrm'' | //kg m<sup>-2</sup> d<sup>-1</sup>// | general | parameter for denitrification in main watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#denitrification|denitrif]] | |
| - | |''denitwl''|//kg m<sup>-2</sup> d<sup>-1</sup>//|general|parameter for denitrification in lakes (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#denitrification|denitrif]]| | + | | ''denitwl'' | //kg m<sup>-2</sup> d<sup>-1</sup>// | general | parameter for denitrification in lakes (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#denitrification|denitrif]] | |
| - | |''sedon''|//m ts<sup>-1</sup>//|general|sedimentation rate of ON in lakes (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|NP lake]]| | + | | ''sedon'' | //m ts<sup>-1</sup>// | general | sedimentation rate of ON in lakes (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|NP lake]] | |
| - | |''sedpp''|//m ts<sup>-1</sup>//|general|sedimentation rate of PP in lakes (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|NP lake]]| | + | | ''sedpp'' | //m ts<sup>-1</sup>// | general | sedimentation rate of PP in lakes (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|NP lake]] | |
| - | |''sedexp''|//-//|general|parameter for sedimentation/resuspension in watercourses|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|P river]]| | + | | ''sedexp'' | //-// | general | parameter for sedimentation/resuspension in watercourses | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|P river]] | |
| - | |''limsedON''|//mg L<sup>-1</sup>//|general|concentration of ON deducted from conc in water when sedimentation is calculated. This should represent the dissolved organic nitrogen.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|NP lake]]| | + | | ''limsedON'' | //mg L<sup>-1</sup>// | general | concentration of ON deducted from conc in water when sedimentation is calculated. This should represent the dissolved organic nitrogen. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|NP lake]] | |
| - | |''limsedPP''|//mg L<sup>-1</sup>//|general|concentration of PP deducted from concentration in water when sedimentation is calculated. This concentration is also deducted from the mean TP concentration when calculating half-saturation factor in the mineralization/production routine.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|NP lake]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP lake]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#primary_production_and_mineralization|C river lake]]| | + | | ''limsedPP'' | //mg L<sup>-1</sup>// | general | concentration of PP deducted from concentration in water when sedimentation is calculated. This concentration is also deducted from the mean TP concentration when calculating half-saturation factor in the mineralization/production routine. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|NP lake]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP lake]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#primary_production_and_mineralization|C river lake]] | |
| - | |''humusN0''|//mg m<sup>-3</sup>//|land use|starting concentration of humusN soil pool|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''humusN0'' | //mg m<sup>-3</sup>// | land use | starting concentration of humusN soil pool | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''humusP0''|//mg m<sup>-3</sup>//|land use|starting concentration of humusP soil pool|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''humusP0'' | //mg m<sup>-3</sup>// | land use | starting concentration of humusP soil pool | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''fastN0''|//mg m<sup>-3</sup>//|general|starting concentration of fastN soil pool|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''fastN0'' | //mg m<sup>-3</sup>// | general | starting concentration of fastN soil pool | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''partP0''|//mg m<sup>-3</sup>//|land use|starting concentration of partP soil pool|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''partP0'' | //mg m<sup>-3</sup>// | land use | starting concentration of partP soil pool | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''fastP0''|//mg m<sup>-3</sup>//|general|starting concentration of fastP soil pool|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''fastP0'' | //mg m<sup>-3</sup>// | general | starting concentration of fastP soil pool | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''occonc0''|//mg L<sup>-1</sup>//|land use|starting value, organic carbon concentration in soil|| | + | | ''occonc0'' | //mg L<sup>-1</sup>// | land use | starting value, organic carbon concentration in soil || |
| - | |''onconc0''|//mg L<sup>-1</sup>//|land use|starting value, organic nitrogen concentration in soil|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''onconc0'' | //mg L<sup>-1</sup>// | land use | starting value, organic nitrogen concentration in soil | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''ppconc0''|//mg L<sup>-1</sup>//|land use|starting value, particulate phosphorus concentration in soil|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''ppconc0'' | //mg L<sup>-1</sup>// | land use | starting value, particulate phosphorus concentration in soil | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''onpercred''|//-//|land use|reduction of ON concentration during percolation|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#percolation| NP perc]]| | + | | ''onpercred'' | //-// | land use | reduction of ON concentration during percolation | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#percolation| NP perc]] | |
| - | |''pppercred''|//-//|land use|reduction of PP concentration during percolation|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#percolation| NP perc]]| | + | | ''pppercred'' | //-// | land use | reduction of PP concentration during percolation | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#percolation| NP perc]] | |
| - | |''pPhalf''|//m//|land use|half depth for partP soil pool|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''pPhalf'' | //m// | land use | half depth for partP soil pool | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''hPhalf''|//m//|land use|half depth for humusP soil pool|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''hPhalf'' | //m// | land use | half depth for humusP soil pool | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''hNhalf''|//m//|land use|half depth for humusN soil pool|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]]| | + | | ''hNhalf'' | //m// | land use | half depth for humusN soil pool | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_pools_initial_values|NP soil]] | |
| - | |''iniT1''|//µU L<sup>-1</sup>//|general|starting value in soil, concentration T1|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''iniT1'' | //µU L<sup>-1</sup>// | general | starting value in soil, concentration T1 | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''iniT1sw''|//µU L<sup>-1</sup>//|general|starting value in surface water, concentration T1|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''iniT1sw'' | //µU L<sup>-1</sup>// | general | starting value in surface water, concentration T1 | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''iniT2''|//°C//|general|starting value in soil, T2 (temperature)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|tracer T2]]| | + | | ''iniT2'' | //°C// | general | starting value in soil, T2 (temperature) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|tracer T2]] | |
| - | |''freuc''|//kg<sup>-1</sup>//|soil type|parameter in Freundlich equation (coefficient)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#balance_sp_partp|P soil]]| | + | | ''freuc'' | //kg<sup>-1</sup>// | soil type | parameter in Freundlich equation (coefficient) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#balance_sp_partp|P soil]] | |
| - | |''freuexp''|//-//|soil type|parameter in Freundlich equation (exponent)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#balance_sp_partp|P soil]]| | + | | ''freuexp'' | //-// | soil type | parameter in Freundlich equation (exponent) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#balance_sp_partp|P soil]] | |
| - | |''freurate''|//d<sup>-1</sup>//|soil type|parameter that steers adsorption/desorption speed|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#balance_sp_partp|P soil]]| | + | | ''freurate'' | //d<sup>-1</sup>// | soil type | parameter that steers adsorption/desorption speed | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#balance_sp_partp|P soil]] | |
| - | |''locsoil''|//-//|general|fraction of emission from rural waste water that is emitted to directly to the lowest soil layer (rest goes to the local watercourse)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#rural_household_diffuse_source|rural]]| | + | | ''locsoil'' | //-// | general | fraction of emission from rural waste water that is emitted to directly to the lowest soil layer (rest goes to the local watercourse) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#rural_household_diffuse_source|rural]] | |
| - | |''drydeppp''|//kg km<sup>-2</sup> ts<sup>-1</sup>//|land use|dry deposition of PP|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]]| | + | | ''drydeppp'' | //kg km<sup>-2</sup> ts<sup>-1</sup>// | land use | dry deposition of PP | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]] | |
| - | |''wetdepsp''|//µg L<sup>-1</sup>//|general|wet deposition of SP|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]]| | + | | ''wetdepsp'' | //µg L<sup>-1</sup>// | general | wet deposition of SP | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]] | |
| - | |''wetdepspl''|//kg km<sup>-2</sup> ts<sup>-1</sup>//|general|wet deposition of SP on water surfaces|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]]| | + | | ''wetdepspl'' | //kg km<sup>-2</sup> ts<sup>-1</sup>// | general | wet deposition of SP on water surfaces | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]] | |
| - | |''aloadconst''|//-//|general|status to keep wet deposition load constant if precipitation is corrected (if set to 1, 0 is default)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]]| | + | | ''aloadconst'' | //-// | general | status to keep wet deposition load constant if precipitation is corrected (if set to 1, 0 is default) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]] | |
| - | |''ponatm''|//-//|land use|correction factor for atmospheric deposition of IN, fraction that goes to fastN-pool instead|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]]| | + | | ''ponatm'' | //-// | land use | correction factor for atmospheric deposition of IN, fraction that goes to fastN-pool instead | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#atmospheric_deposition_of_nitrogen_and_phosphorus|deposition]] | |
| - | |''srrate''|//-//|soil type|fraction for surface runoff|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diversion_of_surface_runoff_and_macropore_flow|surface runoff]]| | + | | ''srrate'' | //-// | soil type | fraction for surface runoff | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diversion_of_surface_runoff_and_macropore_flow|surface runoff]] | |
| - | |''macrate''|//-//|soil type|fraction for macro-pore flow|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diversion_of_surface_runoff_and_macropore_flow|macropore]]| | + | | ''macrate'' | //-// | soil type | fraction for macro-pore flow | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diversion_of_surface_runoff_and_macropore_flow|macropore]] | |
| - | |''mactrinf''|//mm ts<sup>-1</sup>//|soil type|threshold for macro-pore flow|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diversion_of_surface_runoff_and_macropore_flow|macropore]]| | + | | ''mactrinf'' | //mm ts<sup>-1</sup>// | soil type | threshold for macro-pore flow | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diversion_of_surface_runoff_and_macropore_flow|macropore]] | |
| - | |''mactrsm''|//-//|soil type|threshold soil water for macro-pore flow and surface runoff (fraction of wcwp+wcfc i uppermost layer)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diversion_of_surface_runoff_and_macropore_flow|macropore and surface runoff]]| | + | | ''mactrsm'' | //-// | soil type | threshold soil water for macro-pore flow and surface runoff (fraction of wcwp+wcfc i uppermost layer) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#diversion_of_surface_runoff_and_macropore_flow|macropore and surface runoff]] | |
| - | |''soilcoh''|//kPa//|soil type|characteristic of soil for calculation of soil erosion (cohesion)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''soilcoh'' | //kPa// | soil type | characteristic of soil for calculation of soil erosion (cohesion) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''soilerod''|//g J<sup>-1</sup>//|soil type|characteristic of soil for calculation of soil erosion (erodibility)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''soilerod'' | //g J<sup>-1</sup>// | soil type | characteristic of soil for calculation of soil erosion (erodibility) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''epotdist''|//m<sup>-1</sup>//|general|coefficient in exponential function for potential evapotranspiration's depth dependency|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]]| | + | | ''epotdist'' | //m<sup>-1</sup>// | general | coefficient in exponential function for potential evapotranspiration's depth dependency | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|PET]] | |
| - | |''qmean''|//mm yr<sup>-1</sup>//|general|initial value for calculation of mean flow (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|| | + | | ''qmean'' | //mm yr<sup>-1</sup>// | general | initial value for calculation of mean flow (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) || |
| - | |''tpmean''|//mg L<sup>-1</sup>//|lake region|mean TP level in lakes, used for production if P not simulated, used also as starting value for concentration of particulate P in lakes. Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP lake]]| | + | | ''tpmean'' | //mg L<sup>-1</sup>// | lake region | mean TP level in lakes, used for production if P not simulated, used also as starting value for concentration of particulate P in lakes. Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]] | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#primary_production_and_mineralization|NP lake]] | |
| - | |''tnmean''|//mg L<sup>-1</sup>//|lake region|mean TN level i lakes, used as starting value for concentration of organic N in lakes. Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]|| | + | | ''tnmean'' | //mg L<sup>-1</sup>// | lake region | mean TN level i lakes, used as starting value for concentration of organic N in lakes. Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]] || |
| - | |''rivvel1''|//-//|lake region|parameter for calculation of velocity of the water in the watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]]| | + | | ''rivvel1'' | //-// | lake region | parameter for calculation of velocity of the water in the watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]] | |
| - | |''rivvel2''|//-//|lake region|parameter for calculation of velocity of the water in the watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]]| | + | | ''rivvel2'' | //-// | lake region | parameter for calculation of velocity of the water in the watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]] | |
| - | |''rivvel3''|//-//|lake region|parameter for calculation of velocity of the water in the watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]]| | + | | ''rivvel3'' | //-// | lake region | parameter for calculation of velocity of the water in the watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]] | |
| - | |''rivwidth1''|//-//|lake region|parameter for calculation of the width of the watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]]| | + | | ''rivwidth1'' | //-// | lake region | parameter for calculation of the width of the watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]] | |
| - | |''rivwidth2''|//-//|lake region|parameter for calculation of the width of the watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]]| | + | | ''rivwidth2'' | //-// | lake region | parameter for calculation of the width of the watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]] | |
| - | |''rivwidth3''|//-//|lake region|parameter for calculation of the width of the watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]]| | + | | ''rivwidth3'' | //-// | lake region | parameter for calculation of the width of the watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]] | |
| - | |''maxwidth''|//m//|general|parameter for limitation of width of the watercourse|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]]| | + | | ''maxwidth'' | //m// | general | parameter for limitation of width of the watercourse | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake|river]] | |
| - | |''sreroexp''|//-//|general|exponent in the equation for calculation of soil erosion caused by surface runoff|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''sreroexp'' | //-// | general | exponent in the equation for calculation of soil erosion caused by surface runoff | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''pprelmax''|//mm ts<sup>-1</sup>//|general|parameter for PP from surface runoff and tile drains|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''pprelmax'' | //mm ts<sup>-1</sup>// | general | parameter for delay of SS and PP from surface runoff and tile drains | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''pprelexp''|//-//|general|parameter for PP from surface runoff and tile drains|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''pprelexp'' | //-// | general | parameter for delay of SS and PP from surface runoff and tile drains | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''bufffilt''|//-//|land use|filtration of PartP with surface runoff through the buffer zone (fraction that slips through), 0 for land-uses where this is irrelevant|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''bufffilt'' | //-// | land use | filtration of PartP with surface runoff through the buffer zone (fraction that slips through), 0 for land-uses where this is irrelevant | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''innerfilt''|//-//|land use|filtration of PartP with surface runoff from agricultural land far from watercourse (fraction that slips through), 0 for land-uses where this is irrelevant|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''innerfilt'' | //-// | land use | filtration of PartP with surface runoff from agricultural land far from watercourse (fraction that slips through), 0 for land-uses where this is irrelevant | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''otherfilt''|//-//|land use|filtration of PartP with surface runoff from other land types than agricultural land (fraction that slips through), 0 for land-uses where this is irrelevant|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''otherfilt'' | //-// | land use | filtration of PartP with surface runoff from other land types than agricultural land (fraction that slips through), 0 for land-uses where this is irrelevant | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''macrofilt''|//-//|soil type|filtration (retention) of PartP with macropore flow (fraction)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''macrofilt'' | //-// | soil type | filtration (retention) of PartP with macropore flow (fraction) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''sdnsnew''|//g cm<sup>-3</sup>//|general|density of new-fallen snow (former snowdens0)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]]| | + | | ''sdnsnew'' | //g cm<sup>-3</sup>// | general | density of new-fallen snow (former snowdens0) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]] | |
| - | |''snowdensdt''|//g cm<sup>-3</sup> ts<sup>-1</sup>//|general|increase of snow density per day|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]]| | + | | ''snowdensdt'' | //g cm<sup>-3</sup> ts<sup>-1</sup>// | general | increase of snow density per day | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]] | |
| - | |''sdnsmax''|//g cm<sup>-3</sup>//|general|maximum snow density|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]]| | + | | ''sdnsmax'' | //g cm<sup>-3</sup>// | general | maximum snow density | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]] | |
| - | |''sdnsrate''|//ts<sup>-1</sup>//|general|increase of snow density per timestep|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]]| | + | | ''sdnsrate'' | //ts<sup>-1</sup>// | general | increase of snow density per timestep | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]] | |
| - | |''sdnsradd''|//ts<sup>-1</sup>//|general|additional increase of snow density per timestep for warm days|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]]| | + | | ''sdnsradd'' | //ts<sup>-1</sup>// | general | additional increase of snow density per timestep for warm days | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#soil_temperature_and_snow_depth|snow]] | |
| - | |''fertdays''|//d//|general|number of days that fertiliser applications occur counting from application day 1 and forward using the same amount every day|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#fertilizer|fertilizer]]| | + | | ''fertdays'' | //d// | general | number of days that fertiliser applications occur counting from application day 1 and forward using the same amount every day | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#fertilizer|fertilizer]] | |
| - | |''litterdays''|//d//|general|number of days that plant residuals are applied counting from application day 1 and forward using the same amount every day|| | + | | ''litterdays'' | //d// | general | number of days that plant residuals are applied counting from application day 1 and forward using the same amount every day || |
| - | |''humusc1''|//mg m<sup>-3</sup>//|land use|starting concentration for humusC pool in soil’s uppermost soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]]| | + | | ''humusc1'' | //mg m<sup>-3</sup>// | land use | starting concentration for humusC pool in soil’s uppermost soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]] | |
| - | |''fastc1''|//mg m<sup>-3</sup>//|land use|starting concentration for fastC pool in soil’s uppermost soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]]| | + | | ''fastc1'' | //mg m<sup>-3</sup>// | land use | starting concentration for fastC pool in soil’s uppermost soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]] | |
| - | |''humusc2''|//mg m<sup>-3</sup>//|land use|starting concentration for humusC pool in soil’s second soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]]| | + | | ''humusc2'' | //mg m<sup>-3</sup>// | land use | starting concentration for humusC pool in soil’s second soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]] | |
| - | |''fastc2''|//mg m<sup>-3</sup>//|land use|starting concentration for fastC pool in soil’s second soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]]| | + | | ''fastc2'' | //mg m<sup>-3</sup>// | land use | starting concentration for fastC pool in soil’s second soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]] | |
| - | |''humusc3''|//mg m<sup>-3</sup>//|land use|starting concentration for humusC pool in soil lowest soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]]| | + | | ''humusc3'' | //mg m<sup>-3</sup>// | land use | starting concentration for humusC pool in soil lowest soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]] | |
| - | |''fastc3''|//mg m<sup>-3</sup>//|land use|starting concentration for fastC pool in soil lowest soil layer|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]]| | + | | ''fastc3'' | //mg m<sup>-3</sup>// | land use | starting concentration for fastC pool in soil lowest soil layer | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_pools_initial_values|C soil]] | |
| - | |''klh''|//d<sup>-1</sup>//|general|parameter for speed of transformation from litter to humus|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]]| | + | | ''klh'' | //d<sup>-1</sup>// | general | parameter for speed of transformation from litter to humus | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]] | |
| - | |''klo''|//d<sup>-1</sup>//|general|parameter for speed of transformation from litter to DOC|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]]| | + | | ''klo'' | //d<sup>-1</sup>// | general | parameter for speed of transformation from litter to DOC | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]] | |
| - | |''kho''|//d<sup>-1</sup>//|general|parameter for speed of transformation from humus to DOC|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]]| | + | | ''kho'' | //d<sup>-1</sup>// | general | parameter for speed of transformation from humus to DOC | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]] | |
| - | |''kof''|//d<sup>-1</sup>//|general|parameter for speed of transformation from DOC to fastC|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]]| | + | | ''kof'' | //d<sup>-1</sup>// | general | parameter for speed of transformation from DOC to fastC | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]] | |
| - | |''koflim''|//-//|general|parameter for threshold for wetness for transformation DOC to fastC|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]]| | + | | ''koflim'' | //-// | general | parameter for threshold for wetness for transformation DOC to fastC | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]] | |
| - | |''koc''|//-//|general|parameter for DOC-concentrations reduction for percolation|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]]| | + | | ''koc'' | //-// | general | parameter for DOC-concentrations reduction for percolation | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]] | |
| - | |''kcgwreg''|//-//|general|parameter for DOC-concentrations reduction with flow out to regional groundwater|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]]| | + | | ''kcgwreg'' | //-// | general | parameter for DOC-concentrations reduction with flow out to regional groundwater | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]] | |
| - | |''sedoc''|//m ts<sup>-1</sup>//|general|sedimentation rate OC in lakes. Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]].|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#sedimentation|C lake]]| | + | | ''sedoc'' | //m ts<sup>-1</sup>// | general | sedimentation rate OC in lakes. Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#sedimentation|C lake]] | |
| - | |''ripz''|//-//|land use|parameter for OC processes in riparian zone|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#riparian_zone|C riparian]]| | + | | ''ripz'' | //-// | land use | parameter for OC processes in riparian zone | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#riparian_zone|C riparian]] | |
| - | |''ripe''|//m<sup>-1</sup>//|general|exponent for groundwater depth dependence of OC processes in riparian zones|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#riparian_zone|C riparian]]| | + | | ''ripe'' | //m<sup>-1</sup>// | general | exponent for groundwater depth dependence of OC processes in riparian zones | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#riparian_zone|C riparian]] | |
| - | |''rips''|//-//|general|seasonal factor for OC processes in riparian zones|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#riparian_zone|C riparian]]| | + | | ''rips'' | //-// | general | seasonal factor for OC processes in riparian zones | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#riparian_zone|C riparian]] | |
| - | |''tocmean''|//mg L<sup>-1</sup>//|lake region|mean OC fraction in lakes, used that starting value for concentrations of TOC in lakes (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|| | + | | ''tocmean'' | //mg L<sup>-1</sup>// | lake region | mean OC fraction in lakes, used that starting value for concentrations of TOC in lakes (can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) || |
| - | |''minc''|//-//|general|fraction of transformation mineralised to DIC|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]]| | + | | ''minc'' | //-// | general | fraction of transformation mineralised to DIC | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#soil_processes|C soil]] | |
| - | |''ocsoimsat''|//-//|land use|saturation in soil moisture function for degradation of soil organic carbon|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#common_functions|C soil]]| | + | | ''ocsoimsat'' | //-// | land use | saturation in soil moisture function for degradation of soil organic carbon | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#common_functions|C soil]] | |
| - | |''ocsoimslp''|//%//|land use|slope in soil moisture function for degradation of soil organic carbon|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#common_functions|C soil]]| | + | | ''ocsoimslp'' | //%// | land use | slope in soil moisture function for degradation of soil organic carbon | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_orgc#common_functions|C soil]] | |
| - | |''deeplake''|//-//|general|part of the lake's initial volume which is considered as slow (SLP). 0 means that the lake is not divided into a slow and a fast part. Value larger than 1 means the initial volume is all slow part, but a fast part may form at high water levels. Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]. Use deeplake=0 if floodplains are simulated|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#basic_assumptions|lake]]| | + | | ''deeplake'' | //-// | general | part of the lake's initial volume which is considered as slow (SLP). 0 means that the lake is not divided into a slow and a fast part. Value larger than 1 means the initial volume is all slow part, but a fast part may form at high water levels. Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]. Use deeplake=0 if floodplains are simulated | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#basic_assumptions|lake]] | |
| - | |''fastlake''|//-//|general|parameter determining the fraction of lake outflow from the different lake parts (FLP, SLP). Varies between 0 (default, no outflow from FLP) to 1 (outflow fractions proportional to FLP and SLP volumes). Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]].|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#basic_assumptions|lake]]| | + | | ''fastlake'' | //-// | general | parameter determining the fraction of lake outflow from the different lake parts (FLP, SLP). Varies between 0 (default, no outflow from FLP) to 1 (outflow fractions proportional to FLP and SLP volumes). Can also be defined in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#basic_assumptions|lake]] | |
| - | |''laketemp''|//d//|general|maximum value for depth dependent lake temperature routine, 0 means that this function is not used.|| | + | | ''laketemp'' | //d// | general | maximum value for depth dependent lake temperature routine, 0 means that this function is not used. || |
| - | |''snalbmin''|//-//|land use|parameter for snowmelt model 2|| | + | | ''snalbmin'' | //-// | land use | parameter for snowmelt model 2 || |
| - | |''snalbmax''|//-//|land use|parameter for snowmelt model 2|| | + | | ''snalbmax'' | //-// | land use | parameter for snowmelt model 2 || |
| - | |''snalbkexp''|//ts<sup>-1</sup>//|land use|parameter for snowmelt model 2|| | + | | ''snalbkexp'' | //ts<sup>-1</sup>// | land use | parameter for snowmelt model 2 || |
| - | |''cmrad''|//mm m<sup>2</sup> MJ<sup>-1</sup>//|land use|coefficient for radiation snow melt, parameter for snowmelt model 2|| | + | | ''cmrad'' | //mm m<sup>2</sup> MJ<sup>-1</sup>// | land use | coefficient for radiation snow melt, parameter for snowmelt model 2 || |
| - | |''t2trriver''|//J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>//|general|heat transfer parameter for water temperature T2 of river|| | + | | ''t2trriver'' | //J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>// | general | heat transfer parameter for water temperature T2 of river || |
| - | |''t2trlake''|//J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>//|general|heat transfer parameter for water temperature T2 of lake|| | + | | ''t2trlake'' | //J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>// | general | heat transfer parameter for water temperature T2 of lake || |
| - | |''upper2deep''|//J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>//|general|heat transfer parameter for water temperature T2 between lake parts|| | + | | ''upper2deep'' | //J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>// | general | heat transfer parameter for water temperature T2 between lake parts || |
| - | |''tcfriver''|//J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>//|general|air-riverwater heat flow, temperature difference coefficient|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]]| | + | | ''tcfriver'' | //J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>// | general | air-riverwater heat flow, temperature difference coefficient | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]] | |
| - | |''scfriver''|////|general|air-riverwater heat flow, solar radiation coefficient|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]]| | + | | ''scfriver'' | //// | general | air-riverwater heat flow, solar radiation coefficient | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]] | |
| - | |''ccfriver''|////|general|air-riverwater heat flow, constant coefficient|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]]| | + | | ''ccfriver'' | //// | general | air-riverwater heat flow, constant coefficient | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]] | |
| - | |''lcfriver''|////|general|air-riverwater heat flow, linear coefficient|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]]| | + | | ''lcfriver'' | //// | general | air-riverwater heat flow, linear coefficient | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]] | |
| - | |''tcflake''|//J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>//|general|air-lakewater heat flow, temperature difference coefficient|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]]| | + | | ''tcflake'' | //J m<sup>-2</sup> s<sup>-1</sup> °C<sup>-1</sup>// | general | air-lakewater heat flow, temperature difference coefficient | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]] | |
| - | |''scflake''|////|general|air-lakewater heat flow, solar radiation coefficient|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]]| | + | | ''scflake'' | //// | general | air-lakewater heat flow, solar radiation coefficient | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]] | |
| - | |''ccflake''|////|general|air-lakewater heat flow, constant coefficient|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]]| | + | | ''ccflake'' | //// | general | air-lakewater heat flow, constant coefficient | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]] | |
| - | |''lcflake''|////|general|air-lakewater heat flow, linear coefficient|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]]| | + | | ''lcflake'' | //// | general | air-lakewater heat flow, linear coefficient | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|water - atmosphere T2 exchange]] | |
| - | |''stbcorr1''|////|general|parameter for stability correction|| | + | | ''stbcorr1'' | //// | general | parameter for stability correction || |
| - | |''stbcorr2''|////|general|parameter for stability correction|| | + | | ''stbcorr2'' | //// | general | parameter for stability correction || |
| - | |''stbcorr3''|////|general|parameter for stability correction|| | + | | ''stbcorr3'' | //// | general | parameter for stability correction || |
| - | |''licettf''|//°C//|general|lake ice model, water temperature threshold for freeze-up|| | + | | ''licettf'' | //°C// | general | lake ice model, water temperature threshold for freeze-up || |
| - | |''licetf''|//°C//|general|lake ice model, freezing temperature|| | + | | ''licetf'' | //°C// | general | lake ice model, freezing temperature || |
| - | |''licesndens''|//g cm<sup>-3</sup> ts<sup>-1</sup>//|general|lake ice model, snow compaction parameter|| | + | | ''licesndens'' | //g cm<sup>-3</sup> ts<sup>-1</sup>// | general | lake ice model, snow compaction parameter || |
| - | |''licekika''|//cm//|general|lake ice model, ratio between thermal conductivity of ice and heat exchange coefficient in air|| | + | | ''licekika'' | //cm// | general | lake ice model, ratio between thermal conductivity of ice and heat exchange coefficient in air || |
| - | |''licekexp''|//-//|general|lake ice model, water temperature threshold for freeze-up|| | + | | ''licekexp'' | //-// | general | lake ice model, water temperature threshold for freeze-up || |
| - | |''licetmelt''|//cm °C<sup>-1</sup>//|general|lake ice model, melt factor for ice|| | + | | ''licetmelt'' | //cm °C<sup>-1</sup>// | general | lake ice model, melt factor for ice || |
| - | |''licewcorr''|//-//|general|lake ice model, snowfall reduction for wind drift|| | + | | ''licewcorr'' | //-// | general | lake ice model, snowfall reduction for wind drift || |
| - | |''ricettf''|//°C//|general|river ice model, water temperature threshold for freeze-up|| | + | | ''ricettf'' | //°C// | general | river ice model, water temperature threshold for freeze-up || |
| - | |''ricetf''|//°C//|general|river ice model, freezing temperature|| | + | | ''ricetf'' | //°C// | general | river ice model, freezing temperature || |
| - | |''ricesndens''|//g cm<sup>-3</sup> ts<sup>-1</sup>//|general|river ice model, snow compaction parameter|| | + | | ''ricesndens'' | //g cm<sup>-3</sup> ts<sup>-1</sup>// | general | river ice model, snow compaction parameter || |
| - | |''ricekika''|//cm//|general|river ice model, ratio between thermal conductivity of ice and heat exchange coefficient in air|| | + | | ''ricekika'' | //cm// | general | river ice model, ratio between thermal conductivity of ice and heat exchange coefficient in air || |
| - | |''ricekexp''|//-//|general|river ice model, water temperature threshold for freeze-up|| | + | | ''ricekexp'' | //-// | general | river ice model, water temperature threshold for freeze-up || |
| - | |''ricetmelt''|//cm °C<sup>-1</sup>//|general|river ice model, melt factor for ice|| | + | | ''ricetmelt'' | //cm °C<sup>-1</sup>// | general | river ice model, melt factor for ice || |
| - | |''fscmax''|//-//|general|maximum fractional snow cover area|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]]| | + | | ''fscmax'' | //-// | general | maximum fractional snow cover area | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]] | |
| - | |''fscmin''|//-//|general|minimum fractional snow cover area|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]]| | + | | ''fscmin'' | //-// | general | minimum fractional snow cover area | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]] | |
| - | |''fsclim''|//-//|general|limit of fractional snow cover area for onset of snowmax|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]]| | + | | ''fsclim'' | //-// | general | limit of fractional snow cover area for onset of snowmax | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]] | |
| - | |''fscdistmax''|//-//|land use|maximum snow distribution factor|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]]| | + | | ''fscdistmax'' | //-// | land use | maximum snow distribution factor | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]] | |
| - | |''fscdist0''|//-//|land use|minimum snow distribution factor|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]]| | + | | ''fscdist0'' | //-// | land use | minimum snow distribution factor | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]] | |
| - | |''fscdist1''|//m<sup>-1</sup>//|land use|std coefficient for snow distribution factor|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]]| | + | | ''fscdist1'' | //m<sup>-1</sup>// | land use | std coefficient for snow distribution factor | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]] | |
| - | |''fsck1''|//-//|general|parameter for snowmax|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]]| | + | | ''fsck1'' | //-// | general | parameter for snowmax | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]] | |
| - | |''fsckexp''|//s<sup>-1</sup>//|general|parameter for snowmax|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]]| | + | | ''fsckexp'' | //s<sup>-1</sup>// | general | parameter for snowmax | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#snow_cover|snow cover]] | |
| - | |''fsceff''|//-//|general|efficiency of snow cover to influence snow melt and snow evaporation, should have values between 0 and 1. A value of 1 means that snow melt will be linearly scaled with snow cover: melt = melt*(1-fsc*(1-snowcov)).|| | + | | ''fsceff'' | //-// | general | efficiency of snow cover to influence snow melt and snow evaporation, should have values between 0 and 1. A value of 1 means that snow melt will be linearly scaled with snow cover: melt = melt*(1-fsc*(1-snowcov)). || |
| - | |''cmrefr''|//-//|general|refreeze efficiency compared to the degree-day snow melt factor: refreeze=cmrefr*cmlt*(tt-temp) if temp<tt. Used for snow melt model 2.|| | + | | ''cmrefr'' | //-// | general | refreeze efficiency compared to the degree-day snow melt factor: refreeze=cmrefr*cmlt*(tt-temp) if temp<tt. Used for snow melt model 2. || |
| - | |''fepotsnow''|//-//|general|fraction of snow-free potential evapotranspiration, used for calculation of snow evaporation.|| | + | | ''fepotsnow'' | //-// | general | fraction of snow-free potential evapotranspiration, used for calculation of snow evaporation. || |
| - | |''krs''|////|general|parameter for estimating shortwave radiation, also used in petmodel 3 - Modified Hargreaves-Samani, Hargreaves adjustment factor|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|input data]]| | + | | ''krs'' | //// | general | parameter for estimating shortwave radiation, also used in petmodel 3 - Modified Hargreaves-Samani, Hargreaves adjustment factor | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|input data]] | |
| - | |''jhtadd''|////|general|parameter for petmodel 2 - Modified Jensen-Haise/McGuiness|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]]| | + | | ''jhtadd'' | //// | general | parameter for petmodel 2 - Modified Jensen-Haise/McGuiness | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] | |
| - | |''jhtscale''|////|general|parameter for petmodel 2 - Modified Jensen-Haise/McGuiness|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]]| | + | | ''jhtscale'' | //// | general | parameter for petmodel 2 - Modified Jensen-Haise/McGuiness | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] | |
| - | |''alfapt''|////|general|parameter for petmodel 4 - Priestly-Taylor|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]]| | + | | ''alfapt'' | //// | general | parameter for petmodel 4 - Priestly-Taylor | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] | |
| - | |''mwind''|//m s<sup>-1</sup>//|general|average wind speed, used for petmodel 5 when no wind forcing is available|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]]| | + | | ''mwind'' | //m s<sup>-1</sup>// | general | average wind speed, used for petmodel 5 when no wind forcing is available | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]] | |
| - | |''zwind''|//m//|general|wind observation height, typical value is 10|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]]| | + | | ''zwind'' | //m// | general | wind observation height, typical value is 10 | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]] | |
| - | |''zwish''|//m//|general|wanted wind height, typical value is 2|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]]| | + | | ''zwish'' | //m// | general | wanted wind height, typical value is 2 | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]] | |
| - | |''zpdh''|//m//|general|zero plane displacement height|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]]| | + | | ''zpdh'' | //m// | general | zero plane displacement height | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]] | |
| - | |''roughness''|//-//|general|surface roughness (for observed wind)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]]| | + | | ''roughness'' | //-// | general | surface roughness (for observed wind) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|wind]] | |
| - | |''kc''|//-//|land use|crop coefficient for petmodels, default parameter|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]]| | + | | ''kc'' | //-// | land use | crop coefficient for petmodels, default parameter | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] | |
| - | |''kc2''|//-//|land use|crop coefficient for petmodel 2, if not set kc is used|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]]| | + | | ''kc2'' | //-// | land use | crop coefficient for petmodel 2, if not set kc is used | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] | |
| - | |''kc3''|//-//|land use|crop coefficient for petmodel 3, if not set kc is used|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]]| | + | | ''kc3'' | //-// | land use | crop coefficient for petmodel 3, if not set kc is used | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] | |
| - | |''kc4''|//-//|land use|crop coefficient for petmodel 4, if not set kc is used|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]]| | + | | ''kc4'' | //-// | land use | crop coefficient for petmodel 4, if not set kc is used | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] | |
| - | |''kc5''|//-//|land use|crop coefficient for petmodel 5, if not set kc is used|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]]| | + | | ''kc5'' | //-// | land use | crop coefficient for petmodel 5, if not set kc is used | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#alternative_potential_evaporation_models|PET]] | |
| - | |''alb''|//-//|land use|albedo for petmodels|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|net downward radiation]]| | + | | ''alb'' | //-// | land use | albedo for petmodels | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#input_to_alternative_potential_evaporation_models|net downward radiation]] | |
| - | |''incorr''|//-//|wqparreg|//super-parameter//, regional correction factor for parameter governing inorganic nitrogen: \\ <m>par=par*(1+incorr)</m> \\ for ''degradhn'' and \\ <m>par = par * (1 - incorr)</m> \\ for ''denitrlu'', ''denitwl'', ''denitwrm'', and ''denitwrl'' \\ **Note**: ''denitwl'' in [[start:hype_file_reference:lakedata.txt|LakeData.txt]] will also be affected by this correction factor|| | + | | ''incorr'' | //-// | wqparreg | //super-parameter//, regional correction factor for parameter governing inorganic nitrogen: \\ <m>par=par*(1+incorr)</m> \\ for ''degradhn'' and \\ <m>par = par * (1 - incorr)</m> \\ for ''denitrlu'', ''denitwl'', ''denitwrm'', and ''denitwrl'' \\ **Note**: ''denitwl'' in [[start:hype_file_reference:lakedata.txt|LakeData.txt]] will also be affected by this correction factor || |
| - | |''oncorr''|//-//|wqparreg|//super-parameter//, regional correction factor for parameter governing organic nitrogen: \\ <m>par=par*(1+oncorr)</m> \\ for ''dissolhn'' and \\ <m>par=par*(1-oncorr)</m> for ''sedon'' \\ **Note**: ''sedon'' in [[start:hype_file_reference:lakedata.txt|LakeData.txt]] will also be affected by this correction factor|| | + | | ''oncorr'' | //-// | wqparreg | //super-parameter//, regional correction factor for parameter governing organic nitrogen: \\ <m>par=par*(1+oncorr)</m> \\ for ''dissolhn'' and \\ <m>par=par*(1-oncorr)</m> for ''sedon'' \\ **Note**: ''sedon'' in [[start:hype_file_reference:lakedata.txt|LakeData.txt]] will also be affected by this correction factor || |
| - | |''phoscorr''|//-//|wqparreg|//super-parameter//, regional correction factor for parameter governing phosphorus: \\ <m>par=par*(1+phoscorr)</m> for ''soilerod'', ''dissolhP'', ''fastP0'', ''humusP0'', and ''partP0''|| | + | | ''phoscorr'' | //-// | wqparreg | //super-parameter//, regional correction factor for parameter governing phosphorus: \\ <m>par=par*(1+phoscorr)</m> for ''soilerod'', ''dissolhP'', ''fastP0'', ''humusP0'', and ''partP0'' || |
| - | |''ratcorr''|//-//|parreg|correction factor for discharge gratk=gratk(1+ratcorr)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#simple_outlet_lake_olake|rating curve]]| | + | | ''ratcorr'' | //-// | parreg | correction factor for discharge gratk=gratk(1+ratcorr) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#simple_outlet_lake_olake|rating curve]] | |
| - | |''pirrs''|//-//|parreg|irrigation abstraction fraction from surface water sources. Controls the amount of potentially withdrawable surface water that is in fact abstracted. pirrs=1 implies full withdrawal. pirrs=0 if not set.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]]| | + | | ''pirrs'' | //-// | parreg | irrigation abstraction fraction from surface water sources. Controls the amount of potentially withdrawable surface water that is in fact abstracted. pirrs=1 implies full withdrawal. pirrs=0 if not set. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]] | |
| - | |''pirrg''|//-//|parreg|irrigation abstraction fraction from groundwater. Controls the amount of potentially withdrawable groundwater that is in fact abstracted. pirrg=1 implies full withdrawal. pirrg=0 if not set.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]]| | + | | ''pirrg'' | //-// | parreg | irrigation abstraction fraction from groundwater. Controls the amount of potentially withdrawable groundwater that is in fact abstracted. pirrg=1 implies full withdrawal. pirrg=0 if not set. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]] | |
| - | |''sswcorr''|//-//|general|rescaling factor for the soil water stress irrigation threshold. sswcorr=1 implies no rescaling. sswcorr=0 if not set.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_demand|irrigation demand]]| | + | | ''sswcorr'' | //-// | general | rescaling factor for the soil water stress irrigation threshold. sswcorr=1 implies no rescaling. sswcorr=0 if not set. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_demand|irrigation demand]] | |
| - | |''iwdfrac''|//-//|general|fraction of the irrigation threshold which constitutes irrigation water demand. Note iwdfrac can be >1. Only used if demandtype=3.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_demand|irrigation demand]]| | + | | ''iwdfrac'' | //-// | general | fraction of the irrigation threshold which constitutes irrigation water demand. Note iwdfrac can be >1. Only used if demandtype=3. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_demand|irrigation demand]] | |
| - | |''regirr''|//-//|general|connectivity scaling factor for the regional irrigation water abstractions. Regirr=1 implies full connectivity while regirr=0.5 implies that only half of regional demands are taken into account|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]]| | + | | ''regirr'' | //-// | general | connectivity scaling factor for the regional irrigation water abstractions. Regirr=1 implies full connectivity while regirr=0.5 implies that only half of regional demands are taken into account | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]] | |
| - | |''irrdemand''|//mm ts<sup>-1</sup>//|general|the irrigation water demand for subbasins with demandtype=1|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_demand|irrigation demand]]| | + | | ''irrdemand'' | //mm ts<sup>-1</sup>// | general | the irrigation water demand for subbasins with demandtype=1 | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_demand|irrigation demand]] | |
| - | |''immdepth''|//mm//|general|target submergence depth for submerged irrigated crops|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_demand|irrigation demand]]| | + | | ''immdepth'' | //mm// | general | target submergence depth for submerged irrigated crops | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_demand|irrigation demand]] | |
| - | |''cirrsink''|//-//|parreg|concentration reduction fraction in settlement tanks at irrigation abstraction points|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]]| | + | | ''cirrsink'' | //-// | parreg | concentration reduction fraction in settlement tanks at irrigation abstraction points | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]] | |
| - | |''irrcomp''|//-//|general|irrigation source compensation parameter. Irrcomp defines the fraction of the residual irrigation water demands which can be withdrawn from other local sources. Irrcomp=0 if not set.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]]| | + | | ''irrcomp'' | //-// | general | irrigation source compensation parameter. Irrcomp defines the fraction of the residual irrigation water demands which can be withdrawn from other local sources. Irrcomp=0 if not set. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_human_water#irrigation_water_withdrawal|irrigation abstraction]] | |
| - | |''glacdens''|//m<sup>3</sup> water (m<sup>3</sup> ice)<sup>-1</sup>//|general|density of glacier ice (default value=0.85)|| | + | | ''glacdens'' | //m<sup>3</sup> water (m<sup>3</sup> ice)<sup>-1</sup>// | general | density of glacier ice (default value=0.85) || |
| - | |''glac2arlim''|//m<sup>2</sup>//|general|area limit for determine glacier type|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glac2arlim'' | //m<sup>2</sup>// | general | area limit for determine glacier type | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''glacvcoef''|//m//|general|coefficient of glacier area-volume relationship for glacier of type 0 (default), (default value=0.205)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glacvcoef'' | //m// | general | coefficient of glacier area-volume relationship for glacier of type 0 (default), (default value=0.205) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''glacvexp''|//-//|general|exponent of glacier area-volume relationship for glacier of type 0 (default), (default value=1.375)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glacvexp'' | //-// | general | exponent of glacier area-volume relationship for glacier of type 0 (default), (default value=1.375) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''glacvcoef1''|//m//|general|coefficient of glacier area-volume relationship for glacier of type 1, (default value=1.701)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glacvcoef1'' | //m// | general | coefficient of glacier area-volume relationship for glacier of type 1, (default value=1.701) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''glacvexp1''|//-//|general|exponent of glacier area-volume relationship for glacier of type 1, (default value=1.25)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glacvexp1'' | //-// | general | exponent of glacier area-volume relationship for glacier of type 1, (default value=1.25) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''glaccmlt''|//mm °C<sup>-1</sup> ts<sup>-1</sup>//|general|melting parameter for glacier|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glaccmlt'' | //mm °C<sup>-1</sup> ts<sup>-1</sup>// | general | melting parameter for glacier | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''glacttmp''|//°C//|general|threshold temperature for glacier melt|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glacttmp'' | //°C// | general | threshold temperature for glacier melt | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''glaccmrad''|//mm m<sup>2</sup> MJ<sup>-1</sup>//|general|coefficient for radiation glacier melt, parameter for snowmelt model 2|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glaccmrad'' | //mm m<sup>2</sup> MJ<sup>-1</sup>// | general | coefficient for radiation glacier melt, parameter for snowmelt model 2 | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''glaccmrefr''|//-//|general|refreeze efficiency compared to the degree-day glacier melt factor, parameter for snow meltmodel 2|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glaccmrefr'' | //-// | general | refreeze efficiency compared to the degree-day glacier melt factor, parameter for snow meltmodel 2 | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''glacalb''|//-//|general|albedo for glacier ice|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glacalb'' | //-// | general | albedo for glacier ice | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''fepotglac''|//-//|general|fraction of snow-free potential evapotranspiration, used for calculation of glacier evaporation (snowevaporation model 1).|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''fepotglac'' | //-// | general | fraction of snow-free potential evapotranspiration, used for calculation of glacier evaporation (snowevaporation model 1). | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''rcgrw''|//-//|general|recession coefficient for regional groundwater outflow from soil layers (deepground=1 (and 2))|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#soil_regional_groundwater_flow_creation|deep flow]] or [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#deep_percolation|aquifer]]| | + | | ''rcgrw'' | //-// | general | recession coefficient for regional groundwater outflow from soil layers (deepground=1 (and 2)) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#soil_regional_groundwater_flow_creation|deep flow]] or [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#deep_percolation|aquifer]] | |
| - | |''rcgrwst''|//-//|soil type|recession coefficient for deep percolation flow out of soil layers (deepground=2)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#deep_percolation|aquifer]]| | + | | ''rcgrwst'' | //-// | soil type | recession coefficient for deep percolation flow out of soil layers (deepground=2) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#deep_percolation|aquifer]] | |
| - | |''aqretcor''|//-//|parreg (of aquifer)|adjustment of recession coefficients newpar=oldpar(1+aqcor) for aquifer return flow|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#return_flow_from_aquifer|aquifer]]| | + | | ''aqretcor'' | //-// | parreg (of aquifer) | adjustment of recession coefficients newpar=oldpar(1+aqcor) for aquifer return flow | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#return_flow_from_aquifer|aquifer]] | |
| - | |''aqdelcor''|//-//|parreg (of aquifer)|adjustment of deep percolation delay to aquifers newpar=oldpar(1+aqcor) for aquifer return flow|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#deep_percolation_delay_and_aquifer_recharge|aquifer]]| | + | | ''aqdelcor'' | //-// | parreg (of aquifer) | adjustment of deep percolation delay to aquifers newpar=oldpar(1+aqcor) for aquifer return flow | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#deep_percolation_delay_and_aquifer_recharge|aquifer]] | |
| - | |''aqpercor''|//-//|parreg (of subbasin)|adjustment of deep percolation to aquifers newpar=oldpar(1+aqcor) for aquifer return flow|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#deep_percolation|aquifer]]| | + | | ''aqpercor'' | //-// | parreg (of subbasin) | adjustment of deep percolation to aquifers newpar=oldpar(1+aqcor) for aquifer return flow | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:aquifier#deep_percolation|aquifer]] | |
| - | |''optonoff''|//-//|general|switch (0/1) for using general parameters op1-opt8 instead of flooding data of [[start:hype_file_reference:flooddata.txt|FloodData.txt]] (1=use ''opt1''-''opt8'')|| | + | | ''optonoff'' | //-// | general | switch (0/1) for using general parameters op1-opt8 instead of flooding data of [[start:hype_file_reference:flooddata.txt|FloodData.txt]] (1=use ''opt1''-''opt8'') || |
| - | |''opt1''|//m//|general|parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''floll''|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]]| | + | | ''opt1'' | //m// | general | parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''floll'' | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]] | |
| - | |''opt2''|//m//|general|parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''flolp''|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]]| | + | | ''opt2'' | //m// | general | parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''flolp'' | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]] | |
| - | |''opt3''|//m//|general|parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''flmrr''|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]]| | + | | ''opt3'' | //m// | general | parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''flmrr'' | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]] | |
| - | |''opt4''|//m//|general|parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''flmrp''|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]]| | + | | ''opt4'' | //m// | general | parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''flmrp'' | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]] | |
| - | |''opt5''|//-//|general|parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''rclfp'' and ''rcrfp''|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]]| | + | | ''opt5'' | //-// | general | parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''rclfp'' and ''rcrfp'' | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]] | |
| - | |''opt6''|//m//|general|parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''fymol''|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]]| | + | | ''opt6'' | //m// | general | parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''fymol'' | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]] | |
| - | |''opt7''|//m//|general|parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''fymmr''|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]]| | + | | ''opt7'' | //m// | general | parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''fymmr'' | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]] | |
| - | |''opt8''|//-//|general|parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''rcfpl'' and ''rcfpr''|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]]| | + | | ''opt8'' | //-// | general | parameter replacing [[start:hype_file_reference:flooddata.txt|FloodData.txt]] values of ''rcfpl'' and ''rcfpr'' | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#common_floodplain_processes|floodplain]] | |
| - | |''limT2exch''|//m//|general|limit for which deeper river and lakes use surface water heat balance radiation term and other terms (used for modeloption lakeriverice 2)|| | + | | ''limT2exch'' | //m// | general | limit for which deeper river and lakes use surface water heat balance radiation term and other terms (used for modeloption lakeriverice 2) || |
| - | |''t2mix''|//-//|general|switch (0/1) for using mixed lake T2 temperature on outflow of lake (can also be set in [[start:hype_file_reference:lakedata.txt|LakeData.txt]])|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|lake outflow]]| | + | | ''t2mix'' | //-// | general | switch (0/1) for using mixed lake T2 temperature on outflow of lake (can also be set in [[start:hype_file_reference:lakedata.txt|LakeData.txt]]) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#water_temperature_t2|lake outflow]] | |
| - | |''T1expdec''|//days//|general|half time for exponential decay of T1. Applied to T1 in soil water and surface water (but not in snow). Also applied to T1 in pool above soil, adsorbed to soil and in river sediment.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''T1expdec'' | //days// | general | half time for exponential decay of T1. Applied to T1 in soil water and surface water (but not in snow). Also applied to T1 in pool above soil, adsorbed to soil and in river sediment. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''T1freuc''|//L/kg soil or ( (U/kg soil)/(U/L) )//|general|freundlich adsorption isoterm coefficient for adsorption/desorption of T1 to soil.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''T1freuc'' | //L/kg soil or ( (U/kg soil)/(U/L) )// | general | freundlich adsorption isoterm coefficient for adsorption/desorption of T1 to soil. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''T1rel''|//mm<sup>-1</sup>//|general|release of T1 from above soil pool. Typically the pool consist of manure.|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''T1rel'' | //mm<sup>-1</sup>// | general | release of T1 from above soil pool. Typically the pool consist of manure. | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''T1sedexp''|//-//|general|parameter for sedimentation/resuspension of T1 in watercourses|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''T1sedexp'' | //-// | general | parameter for sedimentation/resuspension of T1 in watercourses | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''T1sedvel''|//m/timestep//|general|sedimentation rate of T1 in lakes|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''T1sedvel'' | //m/timestep// | general | sedimentation rate of T1 in lakes | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''T1leakluse''|//µU/L or -//|land use|typical leakage concentration of T1 depending on land use or a scaling factor to typical leakage concentration depending on soil type|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''T1leakluse'' | //µU/L or -// | land use | typical leakage concentration of T1 depending on land use or a scaling factor to typical leakage concentration depending on soil type | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''T1leaksoil''|//µU/L or -//|soil type|typical leakage concentration of T1 depending onsoil type or a scaling factor to typical leakage concentration depending on land use|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]]| | + | | ''T1leaksoil'' | //µU/L or -// | soil type | typical leakage concentration of T1 depending onsoil type or a scaling factor to typical leakage concentration depending on land use | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_tracer#general_tracer_t1|tracer T1]] | |
| - | |''soilcorr''|//-//|land use|factor used to adjust the thicknesses of soil layer 2 and 3 as given in GeoClass. Must be larger than zero if used.|| | + | | ''soilcorr'' | //-// | land use | factor used to adjust the thicknesses of soil layer 2 and 3 as given in GeoClass. Must be larger than zero if used. || |
| - | |''ttrig''|//degree Celsius//|land use|temperature threshold for soil temperature control on soil evapotranspiration|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|evaporation]]| | + | | ''ttrig'' | //degree Celsius// | land use | temperature threshold for soil temperature control on soil evapotranspiration | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|evaporation]] | |
| - | |''treda''|//-//|land use|soil temperature control on soil evapotranspiration|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|evaporation]]| | + | | ''treda'' | //-// | land use | soil temperature control on soil evapotranspiration | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|evaporation]] | |
| - | |''tredb''|//-//|land use|soil temperature control on soil evapotranspiration|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|evaporation]]| | + | | ''tredb'' | //-// | land use | soil temperature control on soil evapotranspiration | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:processes_above_ground#evaporation|evaporation]] | |
| - | |''gldepo''|//m//|general|depth of olake, used if lake_depth in GeoData/LakeData/DamData is zero or negative|| | + | | ''gldepo'' | //m// | general | depth of olake, used if lake_depth in GeoData/LakeData/DamData is zero or negative || |
| - | |''gicatch''|//-//|general|fraction of local runoff that goes through the local lake (ilake), the rests runs directly into the main watercourse. Replaces icatch in GeoData if that one is negative or column missing and ''ilicatch'' not set.|| | + | | ''gicatch'' | //-// | general | fraction of local runoff that goes through the local lake (ilake), the rests runs directly into the main watercourse. Replaces icatch in GeoData if that one is negative or column missing and ''ilicatch'' not set. || |
| - | |''ilratk''|//-//|ilakeregion|parameter of rating curve for ilake outflow (rate), replaces ''gratk'' if above zero|| | + | | ''ilratk'' | //-// | ilakeregion | parameter of rating curve for ilake outflow (rate), replaces ''gratk'' if above zero || |
| - | |''ilratp''|//-//|ilakeregion|parameter of rating curve for ilake outflow (exponent), replaces ''gratp'' if above zero|| | + | | ''ilratp'' | //-// | ilakeregion | parameter of rating curve for ilake outflow (exponent), replaces ''gratp'' if above zero || |
| - | |''illdepth''|//m//|ilakeregion|depth for ilakes|| | + | | ''illdepth'' | //m// | ilakeregion | depth for ilakes || |
| - | |''ilicatch''|//-//|ilakeregion|fraction of local runoff that goes through the local lake (ilake), the rests runs directly into the main watercourse. Replaces icatch in GeoData if negative or column missing.|| | + | | ''ilicatch'' | //-// | ilakeregion | fraction of local runoff that goes through the local lake (ilake), the rests runs directly into the main watercourse. Replaces icatch in GeoData if negative or column missing. || |
| - | |''olratk''|//-//|olakeregion|parameter of rating curve for outlet lake outflow (rate), replaces ''gratk'' if above zero|| | + | | ''olratk'' | //-// | olakeregion | parameter of rating curve for outlet lake outflow (rate), replaces ''gratk'' if above zero || |
| - | |''olratp''|//-//|olakeregion|parameter of rating curve for outlet lake outflow (exponent), replaces ''gratp'' if above zero|| | + | | ''olratp'' | //-// | olakeregion | parameter of rating curve for outlet lake outflow (exponent), replaces ''gratp'' if above zero || |
| - | |''olldepth''|//m//|olakeregion|depth for outlet lakes, replaces lake_depth in GeoData if zero or negative|| | + | | ''olldepth'' | //m// | olakeregion | depth for outlet lakes, replaces lake_depth in GeoData if zero or negative || |
| - | |''glacannmb''|//mm/yr//|general|annual mass balance for correction of initial glacier volume|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]]| | + | | ''glacannmb'' | //mm/yr// | general | annual mass balance for correction of initial glacier volume | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_land#glaciers|glacier]] | |
| - | |''denit3reg''|//d<sup>-1</sup>//|wqparreg|parameter for denitrification rate in soil layer 3, replaces other denitrification rate parameter (''denitrlu'' or ''denitrlu3'') in third soil layer if >0|| | + | | ''denit3reg'' | //d<sup>-1</sup>// | wqparreg | parameter for denitrification rate in soil layer 3, replaces other denitrification rate parameter (''denitrlu'' or ''denitrlu3'') in third soil layer if >0 || |
| - | |''erodluse''|//-//|land use|erosion model 1 landuse erosion factor|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''erodluse'' | //-// | land use | erosion model 1 landuse erosion factor | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''erodsoil''|//-//|soil type|erosion model 1 soil type erosion factor|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''erodsoil'' | //-// | soil type | erosion model 1 soil type erosion factor | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''erodslope''|//-//|general|erosion model 1 slope erosion factor (exponent)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''erodslope'' | //-// | general | erosion model 1 slope erosion factor (exponent) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''erodexp''|//-//|general|erosion model 1 erosion precipitation dependent factor (exponent)|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''erodexp'' | //-// | general | erosion model 1 erosion precipitation dependent factor (exponent) | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''erodindex''|//-//|general|erosion model 1 scaling of subbasin erosion index|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]]| | + | | ''erodindex'' | //-// | general | erosion model 1 scaling of subbasin erosion index | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_soil#soil_erosion|erosion]] | |
| - | |''sedss''|//m ts<sup>-1</sup>//|general|sedimentation velocity of suspended sediments in lakes|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|sedimentation]]| | + | | ''sedss'' | //m ts<sup>-1</sup>// | general | sedimentation velocity of suspended sediments in lakes | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|sedimentation]] | |
| - | |''limsedss''|//mg L<sup>-1</sup>//|general|concentration of SS deducted from concentration in water when sedimentation is calculated|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|sedimentation]]| | + | | ''limsedss'' | //mg L<sup>-1</sup>// | general | concentration of SS deducted from concentration in water when sedimentation is calculated | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|sedimentation]] | |
| - | |''sedae''|//m ts<sup>-1</sup>//|general|sedimentation velocity of algae in lakes|[[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|sedimentation]]| | + | | ''sedae'' | //m ts<sup>-1</sup>// | general | sedimentation velocity of algae in lakes | [[http://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_np_riv_lake#sedimentation_resuspension|sedimentation]] | |
| - | |''fraxe''|//m//|general|mean river depth (m) where fractional river area = 1|[[https://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#rivers|evaporation]]| | + | | ''fraxe'' | //m// | general | mean river depth (m) where fractional river area = 1 | [[https://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#rivers|evaporation]] | |
| - | |''fraxm''|//m//|general|mean river depth (m) where the slope of the fractional river area has its maximum (must be in the range between 0 and ''fraxe'')|[[https://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#rivers|evaporation]]| | + | | ''fraxm'' | //m// | general | mean river depth (m) where the slope of the fractional river area has its maximum (must be in the range between 0 and ''fraxe'') | [[https://www.smhi.net/hype/wiki/doku.php?id=start:hype_model_description:hype_routing#rivers|evaporation]] | |
| </sortable> | </sortable> | ||
start/hype_file_reference/par.txt.txt · Last modified: 2024/02/21 10:25 by cpers
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
