User Tools

Site Tools


start:hype_file_reference:reg_par.txt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
start:hype_file_reference:reg_par.txt [2015/06/18 10:39]
yhundecha
start:hype_file_reference:reg_par.txt [2016/07/08 13:57]
cpers
Line 1: Line 1:
 ====== reg_par.txt ====== ====== reg_par.txt ======
  
-The file is located in the [[start:​hype_file_reference:​info.txt&#​model_options|modeldir]] folder. The file is used for the calculation of the regional parameters as a linear ​function ​of catchment descriptors. This is used when model option ''​regestimate''​ is set in [[start:​hype_file_reference:​info.txt|info.txt]]. The file contains coefficients for the linear estimator for each group. Which catchments belong to which group is given in [[start:​hype_file_reference:​catchgroup.txt|CatchGroup.txt]]. The catchment descriptors which are used in the stimator are given in [[start:​hype_file_reference:​catchdes.txt|CatchDes.txt]]. ​+The file is located in the [[start:​hype_file_reference:​info.txt&#​model_options|modeldir]] folder. The file is used in the  parameter regionalization method ​for the calculation of regional parameters as a linear ​funtion of a set of catchment descriptors. This is used when model option ''​regestimate''​ is set in [[start:​hype_file_reference:​info.txt|info.txt]]. The file contains coefficients for the linear estimator for each group. Which catchments belong to which group is given in [[start:​hype_file_reference:​catchgroup.txt|CatchGroup.txt]]. The catchment descriptors which are used in the stimator are given in [[start:​hype_file_reference:​catchdes.txt|CatchDes.txt]]. ​
  
 The first row of the //​reg_par.txt//​ file gives the number of regional parameters. Then follow two rows for each parameter for a given group of catchments. The first row of each parameter contains the coefficients and the second row the corresponding catchment descriptor to apply the coefficient to.  Information for all parameters is given first for group one, then group two etc. The first row of the //​reg_par.txt//​ file gives the number of regional parameters. Then follow two rows for each parameter for a given group of catchments. The first row of each parameter contains the coefficients and the second row the corresponding catchment descriptor to apply the coefficient to.  Information for all parameters is given first for group one, then group two etc.
Line 7: Line 7:
 The following parameters are possible to estimate with regression: ''​lp'',​ ''​cevpam'',​ ''​cevpph'',​ ''​rivvel'',​ ''​damp'',​ ''​tcalt'',​ ''​tcelevadd'',​ ''​tempcorr'',​ ''​pcelevmax'',​ ''​pcelevadd'',​ ''​pcelevth'',​ ''​cevpcorr'',​ ''​rrcscorr'',​ ''​rrcs3'',​ ''​pcurain'',​ and ''​pcusnow''​. For description of the parameters see [[start:​hype_file_reference:​par.txt|par.txt]]. The following parameters are possible to estimate with regression: ''​lp'',​ ''​cevpam'',​ ''​cevpph'',​ ''​rivvel'',​ ''​damp'',​ ''​tcalt'',​ ''​tcelevadd'',​ ''​tempcorr'',​ ''​pcelevmax'',​ ''​pcelevadd'',​ ''​pcelevth'',​ ''​cevpcorr'',​ ''​rrcscorr'',​ ''​rrcs3'',​ ''​pcurain'',​ and ''​pcusnow''​. For description of the parameters see [[start:​hype_file_reference:​par.txt|par.txt]].
  
-The example below shows entries for regionalizing ​three parameters (''​tcalt''​,''​cevpcorr'',​and ''​tcalt''​) in  a model setup where there are two groups of catchments.+The example below shows entries for regionalizing ​two parameters (''​tcalt'' ​and ''​cevpcorr''​) in  a model setup where there are three groups of catchments.
  
 Example of a //​reg_par.txt//​ file structure: Example of a //​reg_par.txt//​ file structure:
start/hype_file_reference/reg_par.txt.txt ยท Last modified: 2016/07/08 13:57 by cpers