User Tools

Site Tools


start:hype_file_reference:simass.txt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
start:hype_file_reference:simass.txt [2018/02/14 11:21]
cpers
start:hype_file_reference:simass.txt [2018/02/14 11:26] (current)
cpers
Line 3: Line 3:
 This is a file with simulation assessment, summarising performance criteria over model domain. The file is located in the [[start:​hype_file_reference:​info.txt&#​model_options|resultdir]] folder. The file contains values of most [[start:​hype_file_reference:​info.txt:​criteria|performance criteria]] of the selected variables in the objective function. Note: If several RA criteria have been selected, only the last of them will be printed to file. Not calculated criterion are indicated by -9999. All information from the simass-files can also be found in the [[start:​hype_file_reference:​hyss_yymmddhhmm.log|hyss_yymmddHHMM.log]]. ​ This is a file with simulation assessment, summarising performance criteria over model domain. The file is located in the [[start:​hype_file_reference:​info.txt&#​model_options|resultdir]] folder. The file contains values of most [[start:​hype_file_reference:​info.txt:​criteria|performance criteria]] of the selected variables in the objective function. Note: If several RA criteria have been selected, only the last of them will be printed to file. Not calculated criterion are indicated by -9999. All information from the simass-files can also be found in the [[start:​hype_file_reference:​hyss_yymmddhhmm.log|hyss_yymmddHHMM.log]]. ​
  
-When ensemble or sequence simulations are made, the results from simulations (I=1 .. //n// or I=sequence number>​0) are written to files named simassX_00I.txt. For a Monte Carlo calibration //n// is defined by ''​num_ens''​ in [[start:​hype_file_reference:​optpar.txt|optpar.txt]]. For a DE calibration //n// is ''​num_ngen''​ plus one, where the first one is a simulation with average ​of the others parameter values.  ​+When ensemble or sequence simulations are made, the results from simulations (I=1 .. //n// or I=sequence number>​0) are written to files named simassX_00I.txt. For a Monte Carlo calibration //n// is defined by ''​num_ens''​ in [[start:​hype_file_reference:​optpar.txt|optpar.txt]]. For a DE calibration //n// is ''​num_ngen''​ plus one, where the first one is a simulation with median ​of the others parameter values.  ​
  
 For the calculation of criterion for lake water stage, the combination of variables ''​wcom''​ and ''​wstr''​ are exchanged for the internal variables ''​clwc''​ and ''​clws''​ by the program. These variables are the water stages cleaned from ''​w0ref''​ reference level (''​clwc''​=''​wcom''​-''​w0ref'',​ ''​clws''​=''​wstr''​-''​w0ref''​). This makes the criterion calculation more accurate, but note that relative criteria, e.g. relative bias, are relative to the smaller cleaned water stage level. For the calculation of criterion for lake water stage, the combination of variables ''​wcom''​ and ''​wstr''​ are exchanged for the internal variables ''​clwc''​ and ''​clws''​ by the program. These variables are the water stages cleaned from ''​w0ref''​ reference level (''​clwc''​=''​wcom''​-''​w0ref'',​ ''​clws''​=''​wstr''​-''​w0ref''​). This makes the criterion calculation more accurate, but note that relative criteria, e.g. relative bias, are relative to the smaller cleaned water stage level.
start/hype_file_reference/simass.txt.txt ยท Last modified: 2018/02/14 11:26 by cpers