User Tools

Site Tools


start:hype_file_reference:yyyy_ss.txt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
start:hype_file_reference:yyyy_ss.txt [2015/03/27 13:31]
rcapell
start:hype_file_reference:yyyy_ss.txt [2024/01/25 11:38] (current)
Line 1: Line 1:
 ====== yyyy_ss.txt ====== ====== yyyy_ss.txt ======
  
-These files holds annual load results. //yyyy// stands for a year and //ss// stands for one of the HYPE-modelled nitrogen (IN, ON) and phosphorus (PP, SP) species (e.g. //​2001_IN.txt//​). ​Load results are written to the [[start:​hype_file_reference:​info.txt&#​model_options|resultdir]] folder if requested in [[start:​hype_file_reference:​info.txt&#​output_options|output options of info.txt]]. They contain ​calculated ​annual nutrient ​transports (N, P), one row per subbasin. Columns contain yearly transport (kg/yr) of nutrients from atmospheric deposition (wet and dry), fertiliser and decaying plants for all classes, rural household wastewater to soil for each class and to watercourse (for each subbasin), ​transport ​with soil water, transport with in- and outflow to tile drains and surface runoff for each class, load from irrigation, point sources and transport at different points in the subbasin water course, including branched flow.+These output ​files hold modelled ​annual load results. //yyyy// stands for a year during the simulation period ​and //ss// stands for one of the HYPE-modelled nitrogen (IN, ON) and phosphorus (PP, SP) species (an actual file name would be e.g. //​2001_IN.txt//​). ​The files contain ​modelled ​annual nutrient ​loads before and after retention/removal along the modelled nutrient ​transport ​pathways.
  
 +//​yyyy_ss.txt//​ are tab-separated files written to the [[start:​hype_file_reference:​info.txt&#​model_options|resultdir]] folder if requested in [[start:​hype_file_reference:​info.txt&#​output_options|output options of info.txt]]. The first row contains a column header with variable names. The following rows contain values for all variables, in one row per sub-basin. ​
  
-The table below describes all variables written column-wise in //yyy_ss.txt//. Variables with a //_nn// suffix are calculated for each SLC class separately, with //nn// numbers corresponding to numbers in [[start:​hype_file_reference:​geoclass.txt|GeoClass.txt]]+The table below describes all variables written column-wise in //yyyy_ss.txt//. Variables with a //​_nn// ​in header ​suffix are calculated for each SLC class separately, with //nn// numbers corresponding to numbers in [[start:​hype_file_reference:​geoclass.txt|GeoClass.txt]], so that the total number of columns varies depending on the number of SLC classes ​in the model set-up. Point source variable with a //NN// in header suffix are currently eight in total follow each other in order.
- +
-/** +
- * ____________IMPORTANT!__________IMPORTANT!________________IMPORTANT!_______________________IMPORTANT!______________ +
- * +
- * The table below is maintained in spreadsheed file '​file_reference_tables.xlsx'​ +
- ​* ​in the wiki back-up folder on our server. +
- * Please edit table contents there and then copy-paste the updated full table to this page. Ask René if something is  +
- * unclear. Thanks. +
- * ___________________________________________________________________________________________________________________ +
- */+
  
 <​sortable>​ <​sortable>​
 ^ Variable ID ^ Unit ^ Description ^ ^ Variable ID ^ Unit ^ Description ^
-|''​subid''​|//​-//​|Sub-basin ​ID+|''​subid''​|//​-//​|sub-basin ​identification number
-|''​WetAtm_nn''​|//​kg/​year//​|Wet atmospheric deposition | +|''​WetAtm_nn''​|//​kg/​year//​|gross load in wet atmospheric deposition ​on SLC class area in the sub-basin
-|''​DryAtm_nn''​|//​kg/​year//​|dry atmospheric deposition| +|''​DryAtm_nn''​|//​kg/​year//​|gross load in dry atmospheric deposition ​on SLC class area in the sub-basin
-|''​Fertil_nn''​|//​kg/​year//​|fertilizer application| +|''​Fertil_nn''​|//​kg/​year//​|gross load in fertilizer application ​on SLC class area in the sub-basin
-|''​PDecay_nn''​|//​kg/​year//​|plant ​decay+|''​PDecay_nn''​|//​kg/​year//​|gross load from plant residues on SLC class area in the sub-basin
-|''​RuralA_nn''​|//​kg/​year//​|rural household sources, ​load from fraction ​to soil| +|''​RuralA_nn''​|//​kg/​year//​|gross load from rural household source ​fraction ​which is routed into lowest ​soil layer (see parameter //locsoil// in [[start:​hype_file_reference:​par.txt|par.txt]]),​ land SLC classes only
-|''​GrwSln_nn''​|//​kg/​year//​|| +|''​GrwSln_nn''​|//​kg/​year//​|gross load from groundwater flows into lowest soil layer (regional groundwater routine 1, see code ''​deepground''​ in [[start:​hype_file_reference:​info.txt&#​model_options|info.txt model options]], land SLC classes only)
-|''​IrrSrc_nn''​|//​kg/​year//​|| +|''​IrrSrc_nn''​|//​kg/​year//​|gross load in irrigation water, land SLC classes only
-|''​Runoff_nn''​|//​kg/​year//​|| +|''​Runoff_nn''​|//​kg/​year//​|total load in runoff to local stream, including soil runoff, tile drainage, and surface runoff, land SLC classes only| 
-|''​RuralB''​|//​kg/​year//​|rural household ​sources, load from fraction to main river| +|''​RzLay3_nn''​|//​kg/​year//​|load in runoff from root zone, including soil runoff, tile drainage, surface runoff, and percolation to layer 3, land SLC classes only| 
-|''​Urban1''​|//​kg/​year//​|| +|''​RfLay3_nn''​|//​kg/​year//​|load in runoff from third soil layer to local stream, including soil runoff and tile drainage, land SLC classes only
-|''​Urban2''​|//​kg/​year//​|| +|''​RuralB''​|//​kg/​year//​|gross load from rural household ​source fraction which is routed into local stream (see parameter //locsoil// in [[start:​hype_file_reference:​par.txt|par.txt]])| 
-|''​Urban3''​|//​kg/​year//​|| +|''​PointNN''​|//​kg/​year//​|gross load in point source type NNeight columns with NN=01-08 (see description in [[start:​hype_file_reference:​pointsourcedata.txt|PointSourceData.txt]])| 
-|''​Rgrwmr''​|//​kg/​year//​|| +|''​Rgrwmr''​|//​kg/​year//​|gross ​load from groundwater flows into main river (regional groundwater routine 2, see code ''​deepground''​ in [[start:​hype_file_reference:​info.txt&#​model_options|info.txt model options]])| 
-|''​Rgrvol''​|//​kg/​year//​|| +|''​Wtrans''​|//​kg/​year//​|load from water transfer (given in MgmtData) into main river| 
-|''​to N''​|//​kg/​year//​||+|''​Rgrvol''​|//​kg/​year//​|gross load from groundwater flows into outlet lake if [[start:​hype_file_reference:​geodata.txt|GeoData.txt variable //​grwolake//​]] > 0 (regional groundwater routine 1, see code ''​deepground''​ in [[start:​hype_file_reference:​info.txt&#​model_options|info.txt model options]])| 
 +|''​A''​|//​kg/​year//​|load to local stream from all SLC classes| 
 +|''​B''​|//​kg/​year//​|part of load to local stream from all SLC classes that bypasses the internal wetland| 
 +|''​C''​|//​kg/​year//​|part of load to local stream from all SLC classes that goes into the internal wetland| 
 +|''​D''​|//​kg/​year//​|load in fraction ​of load to local stream that has passed through internal wetland| 
 +|''​E''​|//​kg/​year//​|load to local stream after internal wetlands| 
 +|''​F''​|//​kg/​year//​|load in local stream after internal wetlands and from rural household source local stream fraction (''​E''​ + ''​RuralB''​)| 
 +|''​G''​|//​kg/​year//​|load in local stream (''​F''​) after including the effect of local river wetlands (defined in [[start:​hype_file_reference:​geodata.txt|GeoData.txt]],​ see also [[start:​hype_model_description:​hype_human_water&#​constructed_wetlands|wetlands in model description]])
 +|''​H''​|//​kg/​year//​|load after passage of local streams but before internal lakes
 +|''​I''​|//​kg/​year//​|load in fraction of local stream discharge that bypasses local lakes (see variable ''​icatch''​ in [[start:​hype_file_reference:​geodata.txt|GeoData.txt]]
 +|''​J''​|//​kg/​year//​|load in fraction of local stream discharge that passes through local lakes (see variable ''​icatch''​ in [[start:​hype_file_reference:​geodata.txt|GeoData.txt]]
 +|''​K''​|//​kg/​year//​|load in fraction of local stream discharge that has passed through local lakes
 +|''​L''​|//​kg/​year//​|net load in local stream after local lake passage (''​J''​ + ''​K''​)
 +|''​MA''​|//​kg/​year//​|total load to main river, consisting of: net load of local stream, upstream load, point source loads (''​Urban1-3''​),​ water transfers (''​Wtrans''​) and groundwater load (''​Rgrwmr''​)| 
 +|''​M''​|//​kg/​year//​|total load to main river, consisting of: net load of local stream, upstream load, point source loads (''​Urban1-3''​),​ water transfers (''​Wtrans''​) and groundwater load (''​Rgrwmr''​),​ as well as abstractions for irrigation etc.| 
 +|''​N''​|//​kg/​year//​|load to main river after including the effect of main river wetlands (defined in [[start:​hype_file_reference:​geodata.txt|GeoData.txt]],​ see also [[start:​hype_model_description:​hype_human_water&#​constructed_wetlands|wetlands in model description]])| 
 +|''​O''​|//​kg/​year//​|load in main river, after river passage (river nutrient proesses)| 
 +|''​P''​|//​kg/​year//​|load in main river, after outlet wetland| 
 +|''​Q''​|//​kg/​year//​|load in main river with added inflow from lakebasins and regional ground water sources (''​Rgrwmr''​)| 
 +|''​R''​|//​kg/​year//​|net load in main river after outlet lake passage| 
 +|''​S''​|//​kg/​year//​|load in bifurcation branch (see [[start:​hype_file_reference:​branchdata.txt|BranchData.txt]])| 
 </​sortable>​ </​sortable>​
start/hype_file_reference/yyyy_ss.txt.1427459510.txt.gz · Last modified: 2023/11/16 14:28 (external edit)