User Tools

Site Tools


start:hype_tutorials:transfer_lakebasin

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
start:hype_tutorials:transfer_lakebasin [2020/05/05 10:38]
cpers
start:hype_tutorials:transfer_lakebasin [2024/01/25 11:37] (current)
Line 1: Line 1:
-===== Transfer ​lakebasin ​to HYPE version 5.11.0 =====+===== Transfer ​multi-basin lakes to HYPE version 5.11.0 =====
  
 In HYPE version 5.11.0 the function of multi-basin lakes has been changed. HYPE will strive to have a equal water level in all lakebasins belonging to the same lake. This means that although the upstream-downstream connection between lakebasins should be the main direction of flow sometimes the flow between lakebasins may go in the other direction and the output variable cout will then be negative. In HYPE version 5.11.0 the function of multi-basin lakes has been changed. HYPE will strive to have a equal water level in all lakebasins belonging to the same lake. This means that although the upstream-downstream connection between lakebasins should be the main direction of flow sometimes the flow between lakebasins may go in the other direction and the output variable cout will then be negative.
Line 9: Line 9:
   ​   ​
 The main outflow information was earlier given on a separate row for the multi-basin lake. The separate row should no longer be used (''​ldtype''​ 2). It held information on the main outflow of the lake and left the lake through the last lakebasin (earlier ''​ldtype''​ 4). Data in columns ''​w0ref,​ rate, exp, deltaw0, qprod1, qprod2, datum1, datum2, qamp, qpha, regvol, wamp, limqprod''​ is moved from the multi-basin lake row to the row of the last lakebasin. The area of the multi-basin lake is no longer an input, but calculated from the sum of lakebasin areas. The main outflow information was earlier given on a separate row for the multi-basin lake. The separate row should no longer be used (''​ldtype''​ 2). It held information on the main outflow of the lake and left the lake through the last lakebasin (earlier ''​ldtype''​ 4). Data in columns ''​w0ref,​ rate, exp, deltaw0, qprod1, qprod2, datum1, datum2, qamp, qpha, regvol, wamp, limqprod''​ is moved from the multi-basin lake row to the row of the last lakebasin. The area of the multi-basin lake is no longer an input, but calculated from the sum of lakebasin areas.
 +
 +All lakebasins will have the same ''​ldtype''​ (7). The last lakebasin (GeoData order) will be identified by HYPE. All lakebasins of a multi-basin lake need to be connected by maindown. No subbasins without lakebasin or with a lake belonging to other lake/​multi-basin lake are allowed in between the subbasins of lakebasins. ​
  
 If there are branches from other lakebasins than the last one that leave the multi-basin lake, they now need to have specified outflow information. Earlier they were calculated as a fraction of the flow leaving the lakebasin ((1-//​mainpart//​) in [[http://​www.smhi.net/​hype/​wiki/​doku.php?​id=start:​hype_file_reference:​branchdata.txt|BranchData.txt]]). That is not possible anymore, additional outlet of a lakebasin lake now need to be specified in [[http://​www.smhi.net/​hype/​wiki/​doku.php?​id=start:​hype_file_reference:​lakedata.txt|LakeData.txt]]. If there are branches from other lakebasins than the last one that leave the multi-basin lake, they now need to have specified outflow information. Earlier they were calculated as a fraction of the flow leaving the lakebasin ((1-//​mainpart//​) in [[http://​www.smhi.net/​hype/​wiki/​doku.php?​id=start:​hype_file_reference:​branchdata.txt|BranchData.txt]]). That is not possible anymore, additional outlet of a lakebasin lake now need to be specified in [[http://​www.smhi.net/​hype/​wiki/​doku.php?​id=start:​hype_file_reference:​lakedata.txt|LakeData.txt]].
  
-All lakebasins will have the same ''​ldtype''​ (7). The last lakebasin (GeoData orderwill be identified by HYPENote that lakebasins belonging to different multi-basin lakes should not be mixed in [[http://​www.smhi.net/​hype/​wiki/​doku.php?​id=start:hype_file_reference:geodata.txt|GeoData.txt]],​ i.e. all lakebasins ​of a multi-basin lake need to be following each other in GeoData without any other lakebasins ​in between ​(mixing with subbasins without lakes or with simple lakes are ok though).+Figure 1 below gives an example of a multi-basin lake with three lake basin. The lake has two outlets, the main one from subbasin 3, which is the last lakebasin, and an additional one as a branch from lakebasin 2. Each lake basin has inflow from land or upstream subbasins ​(green). The flow within the lake in denoted with black arrows, while outflow from the lake is in blue. 
 + 
 +|{{:start:hype_tutorials:new_lakeb2.png|}}| 
 +|Figure 1: Schematic representation ​of a multi-basin lake with three lakebasins, and the flow between ​themExtractions of the corresponding files; GeoData.txt,​ BranchData.txt and LakeData.txt.|
  
start/hype_tutorials/transfer_lakebasin.1588667884.txt.gz · Last modified: 2023/11/16 14:28 (external edit)