## Navigation

### HYPE Documentation

*Quick links to often-used pages:*

### HYPE links

HYPE OSC (model code)

HYPE Open data access

Flow visualisation

SMHI Hydrology Research Dep., main developer and maintainer of the HYPE model

*Quick links to often-used pages:*

HYPE OSC (model code)

HYPE Open data access

Flow visualisation

SMHI Hydrology Research Dep., main developer and maintainer of the HYPE model

start:hype_file_reference:info.txt:criteria

Performance criteria that can be chosen as objective function for calibration in info.txt. The criteria are calculated for the model domain, based on performances at individual subbasins where observations exists. Three kinds of combination of the individual subbasins are used:

**average/median:**criteria calculated in subbasins individually, and then combined (equal weight to each station, irrespective of time series length)**regional:**criteria calculated on a combined long time series over all subbasins (thus weighted by data lengths)**spatial:**time series att each subbasin is collapsed to a single long-term average, these averages are then combined to a “spatial series” over all subbasins, and the criteria calculated over those

Available performance criteria for domain-wide model evaluation are listed in the table below. Equation definitions for criteria calculation are described here.

**Note**: As described in info.txt, up to 20 performance criteria can be combined for model evaluation. However, for HYPE-internal computational reasons, **criteria TAU, MRA, RRA, and SRA criteria must be defined as one of the first four criteria in info.txt** (e.g. as

`crit 1 criterion MRA`

).
Criterion ID | Description | Equation ID |
---|---|---|

`MR2` | average of Nash-Sutcliffe efficiency for all subbasins with observations. | AVNSE |

`MRE` | average of the relative bias for all subbasins (Note: fraction, not %). | AVRB |

`MRA` | average value of subbasin values of efficiency (RA) similar to Nash-Sutcliffe with coefficient a instead of a square. | AVRA |

`MCC` | Pearson correlation coefficient, average of all subbasins with observations. | AVCC |

`MRS` | error in standard deviation, average of all subbasins with observations. | AVRSB |

`MAR ` | average of absolute relative bias for all subbasins (Note: fraction, not %). | AVARB |

`MNW` | average of Nash-Sutcliffe efficiency adjusted for bias for all subbasins with observations. | AVNSEW |

`AKG` | average of Kling-Gupta efficiency for all subbasins with observations. | AVKGE |

`RR2 ` | regional Nash-Sutcliffe efficiency (all data combined in one long time series). | REGNSE |

`RRE ` | regional relative bias (all data combined in one long time series). | REGRB |

`RRA ` | regional efficiency similar to Nash-Sutcliffe with coefficient a instead of a square. | REGRA |

`MD2 ` | median of Nash-Sutcliffe efficiency for all subbasins with observations. | MEDNSE |

`MDA ` | median of all subbasins’ RA (efficiency similar to Nash-Sutcliffe with coefficient a instead of a square). | MEDRA |

`MKG ` | median of all subbasins’ Kling-Gupta efficiency. | MEDKGE |

`MNR ` | median of all subbasins’ normalised RMSE. | MEDNE |

`SR2 ` | spatial Nash-Sutcliffe efficiency calculated using annual means for all subbasins (requires at least 5 years and 5 subbasins with data) to calculate the Nash-Sutcliffe efficiency. | SPATNSE |

`SRA ` | Spatial efficiency similar to Nash-Sutcliffe with coefficient a instead of a square. | SPATRA |

`TAU ` | average of Kendall's rank correlation coefficient (Tau) value for all subbasins. | AVTAU |

start/hype_file_reference/info.txt/criteria.txt · Last modified: 2019/08/28 14:55 by cpers

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International